Connecting the Fast Track USB Audio Interface

6	Session with Fast Track USB User Guide

3.The driver installer will launch. Follow the on-screen direction prompts. During Installation, Mac OS X will ask you to enter your user name and password. Enter this information and click OK to confirm. If you have not configured a password for your computer, leave the password field blank and click OK. If

you are not the computer’s owner, ask the owner or your Administrator for the missing information.

4.Click “Restart” once the installer has completed the installation.

5.Connect your Fast Track USB to your computer using the USB cable provided.

6.Your Fast Track USB audio interface is ready to use.

Connecting the Fast Track USB Audio Interface

Fast Track USB is compatible with Windows and Macintosh class-compliant USB drivers, and will function as soon as it is connected to your computer. However, for the best low-latency performance in Windows, you will need to install the M-Audio drivers.

Once you have completed installing the Session software in Windows, connect the M-Audio Fast Track USB to an available USB port on your computer. Your computer will recognize the new hardware and Windows computers will briefly display a Found New Hardware message. You may be prompted with a message that the driver being installed has not passed Windows Logo Testing, or asked whether the program you wish to run is a trusted application. Click Continue Anyway or Install to proceed with the installation.

You may also see a Windows prompt asking if you would like to search the Internet for a driver. If so, click No and continue.

Mac users can simply connect the Fast Track USB interface and start using the device.

NOTE: In order to hear the audio signal produced by Fast Track USB, you must either:

1.Connect the two RCA outputs (located on the Fast Track USB rear panel) to powered monitors, an amplifier, or a mixer.

2. Connect headphones to the headphone output, located on the front panel.