M-Audio 24/96 manual Operating Instructions

English

4 - Operating Instructions

<Tips:

i.If the signal is still too low and you are using a microphone at the 1⁄4” TRS input, lower the input level with the [LEVEL] control, and set the “L/M/H” to “H.” Now engage recording then use the [LEVEL] controls to set the signal again. Stop recording then delete the files.

ii.If the signal is still too low, lower the input level with the [LEVEL] controls. Then, use the [MENU] button and [NAV] wheel to select “Record Settings” > “27dB TRS Boost.” Select “On” and press in on the [NAV] wheel to engage a digital signal boost. Now engage recording and use the [LEVEL] controls to set the signal again. Stop recording then delete the files.

10. Once the recording levels and parameters are set, you may begin recording. Press the [REC] button to start recording a new file.

The circle in the upper-left corner of the screen shows that the MicroTrack 24/96 is recording. The triangles in the level meters indicate the input level setting. The numbers in the lower-right corner show the length of the current recording followed by the time remaining.

11.While a file is recording, you can:

<make adjustments to the record levels if necessary using the [LEVELS] buttons.

<pause the recording by pushing in on the [NAV] wheel once. To resume recording, push in on the [NAV] wheel again.

<stop the recording by pressing the [REC] button again.

<delete the file being recorded by pressing the [DEL] button.

12.Once the recording is stopped, the MicroTrack 24/96 will finish writing the file to memory.

12