MaxTech XT4888 user manual Monitor Controls and LEDs

Section 3 - Monitor Controls and LEDs

Figure 3-1 Controls and LEDs

A

B1

C

2

3 4 5 6 7 8 9

1.Power Indicator: LEDs A, B, and C indicate the state of the Monitor.

•LEDs A, B and C On – Normal operations.

•LEDs B and C On – DPMS (Display Power Management Signaling) “SUSPEND” mode. The monitor enters SUSPEND mode when the computer turns off the Vertical Sync. signal. The monitor is in power- saving mode and uses only 25 W.

•LED C On – DPMS “OFF” mode. The monitor enters OFF mode when the computer turns off both the Horizontal and Vertical Sync. signals. The monitor is in minimum power mode and uses only 5 W.

2.Power Switch: Turns monitor on ( ) or off ( O )

3.Pincushion: Adjusts the pincushion (shape) of the display

4.Vertical-Position:Adjusts the vertical position

5.Vertical-Size:Adjusts the display height

6.Horizontal-Position:Adjusts the horizontal position

7.Horizontal-Size:Adjusts the display width.

8.Contrast Control: Adjusts the contrast. Turn clockwise to increase the contrast.

9.Brightness Control: Adjusts the display brightness. Turn clockwise to increase the brightness.

4