MaxTech XT5888 user manual Installation, Attaching the Base, Connecting the Cable

Page 4

Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 8W. While in this mode the Power Indicator LED is amber. When the synchronization signals are re-enabled the monitor returns to normal operation.

Section 2 - Installation

2.1Attaching the Base

Figure 2-1 Connecting the Base

Carefully place the monitor on its side or top.

Insert the hooks on the swivel base into the slots in the bottom of the monitor. Push down and forward on the base until it snaps into place.

Place the display upright in an appropriate location.

2.2Connecting the Cable

Make sure that power to the monitor and the computer is off.

Connect the cable from the back of the monitor to the video connector on the computer.

Figure 2-2 Monitor Connections

Video Cable

COM1

COM2

LPT1

VIDEO

3

Image 4
Contents Users Manual Table of Contents Power Saving Modes Precautions When Using the MonitorGeneral Information Connecting the Cable InstallationAttaching the Base Power Indicator Monitor Controls and LEDsTroubleshooting Appendix a SpecificationsAppendix C Two Year Warranty Appendix B Video Cable PinoutAppendix D Notices FCC Class B StatementCanadian DOC Compliance Statement Disclaimer, Copyright, And Other Notices