LOREX Technology SG19LD800 manual Camera Assign Set ADD Button Adds Password

Page 10

Setting up Remote Viewing

Adding a Site (Individual Unit Configuration)

DVR Information - Enter

the information specific to the unit (refer to page 30 for setup instructions):

•Name - Enter a name for the unit.

•IP / Domain Name - Enter the IP address or Domain Name for the System. This will vary

depending on setup

(Internal Network Connection or External Remote access through the Internet)- refer to page 30 for setup details.

•Port - Set to 6100 by default.

•User ID - Enter the USER

	ID to connect to the system
	(the USER ID is configured
	on the System - i.e. ADMIN
	- case sensitive).
	- case sensitive).				Camera Assign	- Set	ADD Button - Adds the
	•	Password	-	The	Camera Assign	- Set	ADD Button - Adds the
	password used to access				each camera to a portion		site to the Group.
	the	System	(i.e.	The	of the 9-view window by		OK Button - Accepts the
	ADMIN password is set to				of the 9-view window by		OK Button - Accepts the
	ADMIN password is set to				using the drop	down	changes and Closes the
	1234 by default).				using the drop	down	changes and Closes the
	1234 by default).				menu selections.		configuration Window
					menu selections.		configuration Window

10

Image 10

Contents Overview Remote Viewing Remote Viewing Overview Network Setup / Remote Access Overview What do you need?Web Finding Your External IP Address System IP & MAC AddressIP Address MAC Address Network Setting Up Your Ddns Account Navigate to http//DDNS.strategicvista.netUser Name Domain Name Password Dns1.strategicvista.netRouter Computer Network Router Port ForwardingObservation System Internal IP Internet Internal Network System Ddns Setup Ddns SetupLorex NetViewer Software Connection Manager Adding a GroupCamera Assign Set ADD Button Adds Password Lorex NetViewer Software Remote Connection It’s all on the web Product Information