Vizio S3821W-C0, S3821WC0 quick start LED Indicators, Function LED Behavior Description

LED INDICATORS

				LED Indicators are located here:
The LED Indicators will behave differently with each button on the remote control.
Function	LED Behavior			Description
	Analog Audio In - AUX (1)	Press the INPUT button on the remote to cycle through each available input:
	Analog Audio In - AUX (2)	•	Analog Audio In - AUX (1)
	Coaxial In - Digital (3)	• Analog Audio In - AUX (2)
Input	Digital Optical Audio In -	•	Coaxial In- Digital (3)
		• Digital Optical Audio In - Optical (4)
	Optical (4)
	Bluetooth	•	Bluetooth
		• USB Device - USB (6)
	USB Device - USB (6)
	(When searching for device)	Press and hold the		button on the remote.The Sound Bar will be discoverable for 15
Bluetooth Pairing	Flash from Left to Right	minutes. You can now search for the Sound Bar (VIZIO S3821w) using your Bluetooth Device.
	and back continuously.	The sound bar will power down if no device is found.
		Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
	TruVolume On:	Press the TVOL button to enable/disable TruVolume. When enabled (On),TruVolume
DTS TruVolume		provides a consistent and comfortable volume level for a more enjoyable listening
On/Off	TruVolume Off:	experience.
	TruSurround On:	Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will
DTS TruSurround		produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo.
On/Off	TruSurround Off:
	Two center LEDs indicate	Press the TREBLE button then press the Next/Previous button to increase/decrease the
Treble Levels	Treble level 0.	treble level.The LED indicators will move to the right with increasing levels and to the left with
		decreasing levels.
	Two center LEDs indicate	Press the BASS button then press the Next/Previous button to increase/decrease the bass
Bass Levels	Bass level 0.	level.The LED indicators will move to the right with increasing levels and to the left with
		decreasing levels.