Important Safety Instructions

14.LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

15.POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

18.SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

22.HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.

23.IMPORTANT SAFETY NOTE: Before connecting a new component such as the DVD 7 to your audio or home theater system it is always good practice to make certain that all components are turned off, and preferably unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an installation, causing the potential for damage to electronic components and/or speakers. Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.

Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in your system.

AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not come on, contact your authorized service representative.

Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.

Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water or any metal object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source immediately and contact Cary Audio for further instructions.

24.RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

25.NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

A 306 specifications

The Cary Audio Design A 306 is a standout power amplifier that exemplifies the brand's commitment to producing high-performance audio equipment. Designed for both audiophiles and casual listeners, the A 306 brings a wealth of features and technologies that enhance sound quality and user experience.

One of the notable characteristics of the A 306 is its robust power output. Delivering 300 watts per channel into 8 ohms and 600 watts into 4 ohms, it provides ample power to drive a wide range of speakers, effortlessly filling any room with rich, dynamic sound. This amplification capability ensures that listeners can enjoy their favorite music with clarity and precision, irrespective of volume levels.

The A 306 uses a Class A/B design, known for its efficiency and thermal management. This allows the amplifier to maintain high audio fidelity while reducing distortion levels. The result is an engaging listening experience, where details and nuances are preserved, providing a sense of realism that is often missing in lesser amplifiers.

Incorporating advanced technologies, the A 306 features a dual-monoblock architecture, ensuring that each channel operates independently. This design minimizes crosstalk, enhancing stereo imaging and producing a more defined soundstage. The use of high-quality components extends to transformers and capacitors, contributing to the overall performance of the amplifier.

Another key aspect of the A 306 is its flexible connectivity options. It comes equipped with balanced XLR inputs, as well as unbalanced RCA inputs, allowing users to integrate the amplifier seamlessly into various audio setups. The inclusion of a high-end binding post output ensures solid speaker connections, enabling the best possible signal transfer.

The A 306 is aesthetically pleasing, featuring a sleek chassis with a modern finish. The user-friendly interface includes easy-to-read indicators and durable controls, making operation straightforward.

In summary, the Cary Audio Design A 306 is a powerful, sophisticated amplifier that offers audiophiles a range of features designed to enhance their listening experience. Its Class A/B design, dual-monoblock architecture, and high-quality components work in harmony to deliver remarkable sound quality, making it an excellent choice for anyone looking to elevate their audio system.