Troubleshooting

The amplifier does not power on.

1.Check the rear panel circuit breaker. Ensure circuit breaker has not been tripped.

2.Make sure the rear panel Master Power Switch is set to the I (“on”) position.

3.Attempt to activate the amplifier with the front panel standby/on button.

4.Examine the power cord to ensure a good connection between the rear panel AC input connector and the wall outlet.

5.Check the electrical circuit.

One or more channels is not passing audio.

1.Reduce system volume level.

2.Power the amplifier off.

3.Check input connections.

4.Check speaker connections. Allow the amplifier to cool before powering it on again.

Audio sounds out-of-phase

Check to ensure proper speaker wiring.

Audio levels differ.

Check the settings on your preamplifier, processor or controller.

Audio plays, then cuts off.

Check speaker connections for short circuit at amplifier and speaker.

A humming sound is present in the audio.

1.If a cable TV connection is present, disconnect the cable from the wall outlet. If this eliminates the humming sound, a ground loop isolation device is required. Contact your dealer or the cable provider for assistance.

2.Disconnect components one at a time to isolate the problem. Once the problem is identified, make sure the associated component is properly grounded and connected to the same electrical circuit as the Model 7.250.

The TRIGGER INPUT is connected to an external device, but the amplifier does not power on and off with the external device.

Verify the trigger cable is connected at both ends.

If all else fails. . .

1.Contact an authorized Cary Audio Design dealer.

2.Contact Cary Audio Design Customer Service at 919-355-0010 or send an email to: technical_support@caryaudio.com.

Note:

Visit Customer Support at www.caryaudio.com for answers to frequently asked questions and additional troubleshooting information.

7.25 specifications

Cary Audio Design 7.25 is a high-performance integrated amplifier that exemplifies the marriage of modern technology and traditional craftsmanship. Renowned for its outstanding sound quality and elegant design, the 7.25 is the perfect choice for audiophiles seeking an immersive listening experience.

One of the standout features of the Cary 7.25 is its hybrid technology, which combines tube and solid-state amplification. This unique design harnesses the warmth and richness of vacuum tubes while maintaining the precise control and power of solid-state components. The result is a listening experience that is both lush and detailed, allowing users to appreciate the intricacies of their favorite recordings.

The amplifier boasts a power output of 150 watts per channel, providing ample power to drive a wide range of speakers with exceptional clarity and dynamics. Its full-range frequency response ensures that both low and high frequencies are reproduced with fidelity, making it suitable for various music genres from classical to rock.

In terms of build quality, the Cary 7.25 features a robust chassis that minimizes vibrations, thus protecting the internal components and maintaining audio integrity. The meticulous attention to detail in its construction reflects Cary Audio's dedication to producing high-quality audio equipment.

Connectivity options include a variety of inputs such as RCA and balanced XLR, ensuring compatibility with numerous audio sources. Additionally, the 7.25 comes equipped with a built-in phono stage, allowing vinyl enthusiasts to enjoy their records without needing an external preamp.

The user-friendly interface is complemented by a remote control, giving users the convenience of adjusting settings from a distance. Furthermore, the amp employs high-quality audiophile-grade capacitors and transformers, contributing to the overall performance and longevity of the unit.

Another remarkable aspect of the Cary Audio Design 7.25 is its aesthetic appeal. The sleek, modern design features a polished finish and a well-organized front panel, making it an attractive addition to any audio setup.

In summary, the Cary Audio Design 7.25 integrates the warmth of tube sound with the power of solid-state technology, offering audiophiles a high-performance integrated amplifier that excels in both sound quality and aesthetics. With its thoughtful design and advanced features, the 7.25 stands out as a premier choice for discerning listeners.