LSI 60800 manual Connect the USB Devices, System Properties Window Device Manager Tab

Page 7

Figure 3 System Properties Window - Device Manager Tab

5. Click on Close.

1.Load the USB device driver supplied by the USB device manufacturer following the procedure provided with the USB device.

2.Plug in the USB device using the correct cable (see below). There is no need to turn off the computer power. The USB devices can be hot-plugged.

3.The device driver should load automatically without any user interaction.

LSI60800 PCI to USB Host Adapter

Image 7

Contents V e m b e r 2 0 0 USER’S GuideElectromagnetic Compatibility Notices LSI60800 PCI to USB Host Adapter What is Covered in This GuideLSI60800 Board Hardware InstallationInserting the LSI60800 Board Verifying the Installation LSI60800 Software InstallationSystem Properties Window Device Manager Tab Connect the USB DevicesHubs CablingLSI60800 PCI to USB Host Adapter ISO 9000 Certified