Protection Mode

OPERATION

SOURCE COMPONENT CONNECTIONS & OUTPUT SETTINGS

Make all connections before powering on the Model 7.125. It is also recommended that you power on the source components and processor in your system before powering on the Model 7.125. This avoids the possibility of any pops or transients from other components being amplified and sent to the speakers. Always start with a low volume level on the controller or preamplifier to avoid potential damage to the speakers. All volume and level adjustments are made on your preamplifier, controller or surround processor. When using the Model 7.125 for the first time, you should re-set the output levels of the channels on your processor.

The Model 7.125 is equipped to protect itself against potentially damaging conditions such as overheating, mis-wiring and electrical failures. Under such conditions, the Model 7.125 will enter a protection mode. When this occurs, the unit will mute to protect itself and speakers from potential damage. If the Model 7.125 enters protection mode (mutes itself):

1.Immediately power off the unit with the rear panel Master Power Switch and disconnect the AC power cord.

2.Examine all speaker connections to ensure there are no shorts.

Power on the Model 7.125. If the unit remains in a muted state, contact Cary Audio Design customer service for assistance.

7.125 specifications

Cary Audio Design has built a strong reputation in the audiophile community for creating high-performance audio equipment, and their 7.125 model is no exception. This five-channel power amplifier is designed to deliver a rich, dynamic sound experience, making it an ideal choice for both home theater and multi-channel music systems.

One of the standout features of the Cary 7.125 is its robust power output. With 125 watts per channel into 8 ohms, it provides ample power to drive a variety of speaker types, ensuring that even the most demanding audio tracks are delivered with clarity and authority. Its class A/B topology also contributes to its outstanding performance, allowing for detailed audio reproduction across the frequency spectrum.

Technology-wise, the Cary 7.125 employs a sophisticated circuitry design that minimizes distortion and maximizes fidelity. The use of high-quality components, including premium capacitors and resistors, ensures that the signal remains pure, preserving the integrity of the original recording. Additionally, the 7.125 features a dual-mono design, which isolates the left and right channels, further enhancing separation and soundstage.

The amplifier also boasts a sleek, modern aesthetic that will complement any audio system. Its solid aluminum chassis not only provides a sturdy enclosure but also helps to dissipate heat, ensuring stable operation even during extended listening sessions. The front panel features easy-to-read LED indicators and a power switch, making it straightforward to operate.

Another characteristic that sets the Cary 7.125 apart is its flexibility in connectivity. It is equipped with a variety of inputs, including both balanced XLR and unbalanced RCA options, allowing users to integrate it easily into existing setups. This versatility makes it a great fit for both audiophiles and casual listeners who wish to enhance their audio experience.

Lastly, the Cary Audio Design brand is synonymous with build quality and longevity. The 7.125 is no exception, designed to offer years of reliable performance. With its impressive power, innovative technologies, and elegant design, the Cary Audio 7.125 stands out as a premier choice for those seeking exceptional sound quality in their audio systems.