Bryston BMP2 owner manual Bryston Limited Warranty

Page 5

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insu- lated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the product.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT.

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.

THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

BRYSTON LIMITED WARRANTY

Bryston analog audio circuits are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour.

Bryston Digital circuits and cables are warranted for five years from the original date of manufacture. The warranty includes parts and labour. Bryston products having motorized moving parts, excluding motorized volume controls, are warranted for three years from the original date of manufacture. The warranty includes parts and labour.

Bryston will remedy the problem by repair or replacement, as we deem necessary, to restore the product to full performance. Bryston will pay return shipping during the first three years of warranty coverage.

The warranty is fully transferable to the original owner and all subsequent owners during the warranty period. Warranty coverage is automatic and commences with the original date of manufacture which is kept on file at Bryston. In the event of a defect or malfunction, contact Bryston’s repair centers for return authorization. Products must be returned using original packaging material only. Packing material may be purchased from Bryston if necessary. This warranty is considered void if the defect, malfunction or failure of the product or any component part was caused by damage (not resulting from a defect or malfunction) or abuse while in the possession of the customer. Tampering by persons other than factory authorized service personnel or failure to fully comply with Bryston operating instructions voids the warranty. This warranty gives you specific legal rights and you may also have other rights which may vary from province to province and country to country.

BRYSTON SERVICE in CANADA:

BRYSTON SERVICE in the USA:

Postal address:

P.O. BOX 2170, Stn. Main

79 COVENTRY ST., Suite 5

 

PETERBOROUGH, ONTARIO

NEWPORT, VERMONT

 

CANADA K9J 7Y4

U.S.A.

05855-2100

Courier address: 677 NEAL DRIVE

 

 

 

PETERBOROUGH, ONTARIO

PHONE:

802-334-1201

 

CANADA K9J 6X7

FAX:

802-334-6658

PHONE:

705-742-5325

E-mail:

usaser@bryston.ca

FAX:

705-742-0882

 

 

E-mail:

cdnser@bryston.ca

 

 

BRYSTON SERVICE outside Canada and the USA:

contact your local distributor or

 

CHECK OUR WEB SITE:

www.bryston.ca

E-MAIL BRYSTON DIRECTLY:

cdnser@bryston.ca

FAX BRYSTON DIRECTLY:

01-705-742-0882

PHONE BRYSTON DIRECTLY:

01-705-742-5325

BMP2-OWNERS-MANUAL_20060112

Page 4 Page 5
Image 5
Page 4 Page 5
Contents BMP2 Page 1K5 Page Bryston Limited Warranty

BMP2 specifications

The Bryston BMP2 is an advanced preamplifier and processor that epitomizes excellence in audio performance and versatility. Renowned for its premium sound quality, the BMP2 is ideal for audiophiles and home theater enthusiasts alike, boasting a variety of features that enhance its usability and function.

At the heart of the BMP2 is its state-of-the-art analog signal processing technology, which ensures that audio fidelity is preserved at all stages of sound reproduction. The unit is designed to handle both line-level and phono inputs, making it a multifunctional device suitable for various audio sources. With its dedicated phono input, it accommodates vinyl enthusiasts, providing a warm, rich sound characteristic of analog records.

The BMP2 employs Bryston's proprietary technologies, including their renowned low-noise circuitry and high-performance power supply. This combination minimizes distortion and enhances dynamic range, allowing for a truly immersive listening experience. The preamp is configured with an array of inputs and outputs, including multiple HDMI ports, ensuring seamless integration with modern home theaters and audio setups.

In addition to its robust audio processing capabilities, the BMP2 features an intuitive user interface. The front panel is equipped with a clear display and easy-to-use controls, allowing users to navigate through options with simplicity. Remote control functionality further enhances usability, offering convenience for adjusting settings from a distance.

The build quality of the BMP2 is another hallmark of the Bryston brand. Constructed from high-grade materials, it features a sturdy chassis designed to reduce electromagnetic interference and vibrations, which can negatively impact sound quality. Its elegant design not only performs well but also complements any high-end audio system aesthetically.

Furthermore, the BMP2 offers extensive customization options, allowing users to fine-tune sound profiles to match their specific preferences. This adaptability, coupled with Bryston's commitment to quality craftsmanship, makes the BMP2 an investment that promises longevity and performance.

In conclusion, the Bryston BMP2 stands out as a premier choice for those seeking a high-quality preamplifier and processor. With its advanced technology, multitude of features, and superior build quality, the BMP2 delivers an exceptional audio experience that caters to both casual listeners and serious audiophiles.
Top Page Image Contents