MaxTech FHX-1200 manual Troubleshooting, Specifications, Base-TX Cable Requirements

Page 6

Section 4 - Troubleshooting

Symptom: Partition indicator lights up.

Causes: Hub has partitioned the 100BASE-TX (RJ-45) port due to excessive collisions.

Solution: If port partitioning has occurred, the hub will automatically enable the port when the faulty condition disappears.

Symptom: Link/Traffic indicator remains unlit.

Causes: The workstation’s network adapter, cable or the hub port is defective.

Solution: The most common cause is a defective network adapter or cable connection. Check the corresponding cable connections, or the workstation’s network adapter for possible defects. Verify that the correct cable type (straight-through catagory 5) is being used (see Section 6). Replace the defective cable or adapter.

Symptom: Port 12 and Daisy-Chain port do not work simultaneously.

Causes: Both ports are physically the same port.

Solution: Use either Port 12 or the Daisy-chain port.

Section 5 - Specifications

Network Standard:

IEEE 802.3u Ethernet 100Base-TX Class I and Class II

 

Repeater

Transfer rate:

100 Mbps

Topology:

Tree/Star

Access Method:

CSMA/CD, 100 Mbps

Media:

Catagory 5, 2 pair, UTP or STP

Max. cable length:

328 ft. (100 meters)

Ports:

12 RJ-45 jacks

Crossover connector:

1 RJ-45 (port 12)

Stackable connector:

SCSI II Cable connection

100Base-FX connector: SC connector (62.5/125)

Auto-partition:

Yes

Expandability:

72 ports (Class I)

Dimensions:

17.25” x 10.1” x 1.78”

Certification:

FCC Part 15 Class A

Temperature:

0° C to 55° C (operating)

Humidity:

5% to 95% (operating, non-condensing)

Power:

100-240VAC, 55 W max., 50/60 Hz

Section 6 - 100 Base-TX Cable Requirements

100Base-TX networks use unshielded or shielded twisted-pair cable and 8-pin RJ- 45 modular connectors. Use 22-26 AWG, 2- or 4-pair, 100 ohm/ft, solid conductor Category 5 cable. Maximum cable length from hub to workstation is 328' (100 m).

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents FHX-1200 Contents Installation Connecting Workstations to hubIntroduction Daisy-chaining hubs Stackinging hubsLED indicators FunctionTroubleshooting Specifications100 Base-TX Cable Requirements Technical Support Straight-Through CrossoverInstalling the 100Base-FX module Connecting cables to the 100Base-FX portAppendix a Optional 100Base-FX module Appendix C CE Mark Declaration of Conformance Appendix D Two Year Limited WarrantyAppendix B FCC Notice FCC Compliance Statement

FHX-1200 specifications

The MaxTech FHX-1200 is a cutting-edge piece of technology designed to meet the evolving needs of industries requiring high performance and reliability. Engineered with precision, this device stands out for its extraordinary capabilities and advanced features that cater to various applications, from manufacturing to telecommunications.

One of the standout characteristics of the MaxTech FHX-1200 is its robust build quality, constructed with durable materials that guarantee longevity and resistance to harsh environments. This reliability is crucial in industries where equipment undergoes extreme conditions, ensuring consistent performance over time.

The MaxTech FHX-1200 is powered by state-of-the-art processing technology, integrating high-speed processors that enhance its operational efficiency. This advanced processing power allows the device to handle intricate tasks swiftly, dramatically improving productivity in any setting. Furthermore, the device is equipped with cutting-edge cooling technology, which effectively manages thermal output, ensuring optimal performance during prolonged use.

In terms of connectivity, the FHX-1200 features advanced networking capabilities, including support for both wired and wireless connections. With its ability to integrate seamlessly into existing networks, it facilitates robust communication across various platforms, enhancing collaboration and data exchange.

Security is a priority for the MaxTech FHX-1200, which comes with built-in encryption protocols and secure access features. These technologies mitigate the risk of unauthorized access and data breaches, providing peace of mind for users in sensitive environments.

User-friendly interfaces are another highlight of the FHX-1200. The intuitive design allows for easy navigation and operation, enabling users to maximize the device's capabilities without extensive training. Additionally, customizable settings ensure that users can tailor the device according to their specific requirements.

Energy efficiency is another critical feature of the MaxTech FHX-1200. Designed with sustainable practices in mind, it not only reduces operational costs but also minimizes its environmental impact. This emphasis on sustainability aligns with contemporary industry standards, making it an ideal choice for businesses aiming to adopt greener practices.

Overall, the MaxTech FHX-1200 represents a significant advancement in technology, combining durability, efficiency, and user-friendliness. Its impressive features and capabilities make it a versatile solution for a wide range of applications, ensuring that it remains a top choice for professionals in various fields.
Top Page Image Contents