99-2008 KIT ASSEMBLY
DOUBLE DIN RADIO PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1Cut and remove the center bar from the radio housing. (Figure A)
2Snap the Double DIN brackets to the inside edge of the radio housing.
(Figure B)
3Slide the Double DIN radio or stacked ISO mount units into the bracket/radio housing assembly then secure to the assembly using the screws supplied with the radio or ISO mount units.
(Figure C)
4Snap the Double DIN Trim plate onto the front of the Radio Housing.
(Figure C)
A
B
Continue to final assembly.
C
5