Lucent Technologies Lucent Compact Switch specification

Technical Specifications

1.Protocol Support

IP Protocols: BICC, MEGACO, MGCP, SIP/SIP-T, SigTran, TCP, UDP, RTP, RTCP

SS7 Protocols: ANSI and ITU/ETSI, Q.767, ISUP, TCAP variants, IS-41, GSM

ISDN Protocols: Q.931 PRI, GR-1268 PRI, ETSI PRI

CAS Protocols: FG-D, CAMA MF, line or trunk supervision, DTMF GR-303 interface

GR-1298/1299 AIN 0.2 compliance AIN 0.1 for LNP and 800 services

2.Redundancy

1:1 system processor and switch fabric redundancy 1:N I/O module redundancy

3.Call Handling

450,000 BHCA

80,640 TDM DS0 ports, protected

21,504 VoIP DS0 ports, protected

G.711, G.726, G.729a/b, G.723.1, T.38 fax relay, echo cancellation (128 msec tail)

4.On-Switch Database

A high capacity (more than 100,000 subscribers) flexible database to store subscribers, features, and routing information for both tandem and Class 5 applications

5.Operations

PlexView® Element Management System supports provisioning, performance monitoring, and fault management

Billing: GR-1343 AMA interface, GR-1100 BAF or ASCII CDRs

Order Entry: manual or automated service order execution Traffic Analysis and Reporting with customized report building 4000 seconds of announcements on-switch

Call Progress Tones on switch

3-way conferencing on-switch CALEA support on-switch

6.Input/Output Support

28-port DS1, channelized: SF, ESF, B8ZS, AMI

28-port E1 channelized: CRC4, HDB3

3-port DS3/STS-1, channelized: VT1.5 or M13/C-Bit mapped, B3ZS

8-port DS3/STS-1, channelized: VT1.5 or M13/C-Bit mapped B3ZS

Triple OC-3, channelized: VC-1.5 or M13

Triple STM-1 channelized: VC-12

Quad 1000 Mbps Ethernet module with either: quad 1000 base-T, quad 1000 base- LX, single mode or SX multi-mode interface using standard GBIC modules

7.Physical

24.5” H x 21.5” W x 18” D including cabling 180 lbs, fully loaded

-40 to –56.7 Vdc, 1450 watts fully loaded

NEBS CO and ETSI compliant operating environment Redundant BITS timing support with internal Stratum 3 sources CE and UL certified

To learn more about our comprehensive portfolio, please contact your Lucent Technologies Sales Representative or:

Call 1 888 4 LucentSM

Visit our web site at

www.lucent.com.

This document is for planning purposes only, and is not intended to modify or supplement any Lucent Technologies specifications or warranties relating to these products or services. The publication of this information in this document does not imply freedom from patent or other protective rights of Lucent Technologies or others. Specifications are subject to change without notice.

Lucent Technologies, Inc.

Compact Switch v2 08/05