Specifications, Operating Temperature 0 to 40 C

Technical Features [Liebert Hiswitch2]

Rating (A)	Dimensions (W x D x H)	Weight*(kg)
	[mm]

100	762 x 813 x 1956	354
250	762 x 813 x 1956	354
400	965 x 813 x 1956	544
600	965 x 813 x 1956	544
800	2134 x 813 x 1956	1134
1000	2134 x 813 x 1956	1134

*Note: Actual Weights will vary depending on installed options.

Specifications

Operating Specifications

Voltage: 208, 220, 240, 380, 400, 415 VAC (field selectable), +/- 10%

Frequency: 50 or 60 Hz (field selectable), +/- 5%

Short-circuit Withstand Capability: 100kA at 208VAC, from 65kA to 100kA at 480VAC (depending on the rating)

Sense and transfer time: 5ms maximum

Overload Capability: 125% for 10 minutes, 150% for 2 minutes, 110% for 1 hour

Operating Temperature: 0 to 40° C

Standard Features

All components front accessible for installation and service; no side or rear access required

Triple-redundant DSP digital logic

Dual-redundant power supplies 100% rated, fuseless design

Flash memory enables firmware updates while supporting critical load

CANBUS internal control wiring

Rack-out control/power assembly on units up to 600A, to allow maintenance, service, or full replacement without disrupting the critical load

3-pole configurations

Top and bottom cable entry

Dual-lug installation bus with pem nuts for single-hand installation and "hot" torque service

Optional Features*

Full range of Open Comms™ hardware and software

Internal modem for dialing out alarms to phone or pager

Color touch-screen LCD interface eliminates mechanical pushbuttons

Intuitive user interface with drop-down menus and dialog boxes

Programmable output relays for custom customer alarms and connections

Customizable input relays allow alarms from other devices to be displayed on HiSwitch2 display

*Compatible with LCD Panel only

While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. © 2004 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice.

All names referred to are trademarks or registered trademarks of their respective owners. ® Liebert and the Liebert logo are registered trademarks of the Liebert Corporation. ® Keeping Business in Business is a registered trademark of the Liebert Corporation. The Emerson logo is a trademark and service mark of Emerson Electric Co.

Liebert HIROSS UPS Sales Headquarters	Liebert HIROSS Services Headquarters	Emerson Network Power Ltd - UK
Via Leonardo da Vinci,8	Via Leonardo da Vinci,8	Fourth Avenue, Globe Park - Marlow
35028 - Piove di Sacco (PD)	35028 - Piove di Sacco (PD)	Buckinghamshire - SL71YG
tel. +39 049 9719111 fax +39 049 9719317	tel. +39 049 9719111 fax +39 049 9717053	tel. +44 1628 403200 fax +44 1628 403203
	service@liebert-hiross.com