INSTALLATION
Parts required
•Intellislot USB Card
•USB cable
Tools required
• Either #2 (medium) Phillips or small flat head screw driver.
1.It is not necessary to turn the UPS off prior to instal- lation. Locate the Intellis- lot Port on the rear panel of your UPS. (Location and orientation may vary according to specific UPS model.)
2.Remove the two retaining screws of the Intellislot Port cover plate on the UPS back panel. Save the screws for reassembly.
USB card being fitted in Intellislot Port
3.The card and slot are keyed to insert in one posi- tion only. Initially, the card should slide in freely as you carefully align screw holes. As you feel it click into place, press
firmly to ensure solid seating in the slot.
4.Using the screwdriver, secure the card to the UPS chassis with the two retaining screws. Make sure the screws are snug, not tight, to avoid damage to the device.
2