Liebert Mini-Mate2 specs

Low Total Cost Of Ownership:

High-Efficiency Compressor. The rotary or scroll compressors are both energy-efficient and rugged,

Liebert Monitoring Solutions:

When You Need To Know

You will find a full-range of monitoring and control systems, communications modules designed to interface Liebert equipment with a variety of building management systems, plus stand-alone monitoring, control and leak detection devices.

to ensure continuous operation.

Free-Cooling Option. A second cooling coil allows the system to take advantage of colder outdoor temperatures and bypass compressor operation.

Building

Cooling

Tower

Free-Cooling Option

Free

Cooling

Coil

Water Temperature Sensor

Water/

Glycol

Condenser

Field-supplied piping

When water temperature goes below 45˚F, cooling switches over to Free-Cooling operation. A separate chilled water source can also be used with Air-Cooled system. Note: Special cupro-nickel free-cooling coil must be specified when applied to open cooling tower.

Local And Remote

Monitoring Panels

These units provide basic monitoring and control for a single unit or small groups of equipment either at the equipment location or to a remote site.

Products include:

Liebert Universal Monitor

Liebert Controllers

Leak Detection

Liebert Liqui-tect®leak detection systems alert facility personnel to the presence of leaking fluids before serious damage results. They provide quick sensing and accurate reporting of leaks below the floor, above the ceiling or at the perimeter of a room.

Products include:

Liebert Liqui-tect Panel

Two Channel Direct Read

Leak Detection

Liebert Zone Leak Detection Kits

Liebert Point Leak Detection Sensor

Fundamental Monitoring

Liebert Nform™ is

a centralized monitoring and communications software package that combines full-scale monitoring with cost-effective deployment through the use of the existing network infrastructure.

Products include:

Liebert Nform Software

Liebert IntelliSlot Web/485

Card ADPT

Advanced Monitoring

Liebert SiteScan® Web offers comprehensive, centralized monitoring, control, data analysis and reporting for a full-range

of computer support systems. It provides web-based site monitoring, alarm management and trending/analysis for critical sites.

Products include:

Liebert SiteScan Web Software

For further information,

please refer to www.liebert.com

Third Party Monitoring System Connectivity

The use of open protocols allows you to interface Liebert units and monitoring systems with other types and brands of control equipment including BMS, NMS, SCADA and fire alarm systems.

Protocols supported:

Modbus

BACnet

SNMP