Bryston 60 owner manual Special Instructions, Powerpac 120/300

Page 5

SPECIAL INSTRUCTIONS

POWERPAC 120/300

The PowerPac 120/300 remote on/off function allows the user to link the power on/off of an amplifier, or group of amplifi- ers, to an external preamp, or other control product. This is useful in installations, such as home theater, which usually present a convenience problem for powering up mul- tiple amplifiers, often at distant locations from the source.

Located on the front panel of the PowerPac 120/300 (see illustration), is a two terminal 12 volts (active range 9 -12

volts AC or DC of either polarity), input connector and a potentiometer. The PowerPac amplifiers can then be powered- up by an external 12-volt signal connected to the terminals of the jack.

This jack will accept 1/4 -inch stripped wire ends, inserted into the square holes provided, and the adjacent screws care- fully tightened to hold them in place. The internal "delay" turn-on circuit, will delay turn–on between 1 and 10 seconds, follow- ing application of the 12-Volts. In this way groups of amplifiers may be sequenced on to distribute power surges over a period of time.

The power switch must be left in the “off” position, at all times for the PP120 amplifier to operate in the re- mote mode.

The PP300 has a 3-position switch al- lowing for ‘Local (on)’ or ‘Off ‘or ‘REM (remote)’ power selection.

The amplifier will remain powered-up while the 12-Volt signal is present, and will turn off when the 12-Volt signal is switched off.

Input sensitivity is selectable using the ‘INPUT’ slide switch. In the ‘ BAL REG' posi- tion, 2 Volts in will give 100 Watts into 8 ohms at the output. This is the recom- mended setting when using Bryston pre- amplifiers or other pre-amplifiers having ac- tive balanced outputs. This setting also pro- duces the lowest noise floor.

The ‘BAL +6 dB ” setting adds 6 dB of gain to provide an input sensitivity of 1 Volt in = 100 Watts / 8 ohms at the output for outputs that are transformer coupled, or low level sources.

The ‘UNBAL ’ setting selects the gold plated ‘phono’ type connector. The input impedance is 50K ohms.

Image 5
Contents Bryston OWNER’SMANUAL General Instructions Setup RecommendationsGeneral Information DescriptionInput and Output Connectors Bryston Powerpac 60/120/300Grounding and Ground LIft Switch except PP300 and PP120 Power Clipping IndicatorPage Special Instructions Powerpac 120/300Monaural Amplifier Push Bryston PowerP ac Specifications Bryston 20 -YEARWARRANTY

300, 120, 60 specifications

Bryston, a renowned name in the high-end audio industry, is celebrated for its unwavering commitment to quality and performance. Three standout products from their extensive amplifier lineup are the Bryston 60, 120, and 300, each catering to different needs while embodying the brand's core principles: exceptional sound, durability, and advanced technology.

The Bryston 60, often considered the entry point into the Bryston family, delivers an impressive 60 watts per channel into 8 ohms. Its sleek design and compact footprint make it suitable for various audio setups, from small home theaters to stereo systems. The amplifier is equipped with a robust power supply, ensuring that it can handle dynamic peaks with ease. Its high-quality components contribute to a sound that is both transparent and detailed, allowing listeners to experience their music as intended by the artists.

Stepping up to the Bryston 120, this model provides 120 watts per channel into 8 ohms, making it ideal for larger rooms or more demanding speakers. The Bryston 120 incorporates advanced engineering, featuring a toroidal transformer for enhanced efficiency and reduced electromagnetic interference. This results in a cleaner power delivery, which translates to greater fidelity and nuance in sound reproduction. Additionally, the amplifier's aluminum front panel and sturdy construction signify its premium build quality, ensuring longevity and durability.

For those seeking ultimate power and performance, the Bryston 300 is a powerhouse with 300 watts per channel into 8 ohms. This amplifier is designed for serious audiophiles and professional applications, capable of driving even the most challenging speaker loads effortlessly. Its output stage employs ultra-high-speed transistors, leading to exceptional transient response and dynamic range. The 300 features Bryston’s proprietary Linear Phase Power Supply technology, which further enhances its ability to deliver clean, powerful sound without distortion, even at high volumes.

All three models share common features that exemplify Bryston’s dedication to excellence. They come with a 20-year warranty, a testament to their reliability and the brand’s confidence in their products. Each amplifier is meticulously hand-built in Canada, using top-quality materials and advanced manufacturing techniques. Whether it's the compact Bryston 60, the robust 120, or the formidable 300, these amplifiers showcase the perfect blend of technology and craftsmanship, providing an unparalleled audio experience for enthusiasts around the world.