Liebert GXT3 | Liebert 5000RT230, 6000RT230 instruction

Liebert® GXT3™

Quick Start Guide – 5000-6000VA RT230 Models

The Liebert GXT3 is shipped with the following items:

•Terminal Block Communication terminals

•Compact disc with:

oLiebert MultiLink®

oConfiguration program

oUser manual (electronic version)

•USB cable, one; 2m (6-1/2 ft.) long

•Rack handles with mounting hardware

•Plastic tower support base, one set

•Plastic Bezel

•Warnings, safety instructions booklet and WEEE recycling sheet (ISO 14001 compliance)

If the UPS is intended to be installed in the Tower orientation, locate the support base and spacers then assemble the two stand assemblies with an even number of spacers in each assembly. Insert the UPS between the support base assemblies with adequate space between the assemblies as shown in the picture below. Note the display should be located on the upper half of the unit in the Tower orientation. To rotate the display with the bezels removed, depress the grooved tabs on the sides and rotate it 90 degrees clockwise. If the USP is to be installed in a rack enclosure, follow the instructions provided with the rack mounting hardware for proper installation.

The UPS is hardwired input with a conduit entry knockouts provided. Input and output wiring should be installed in separate conduits. All wiring should be done in accordance to all local and national electrical codes. Before wiring the UPS ensure that the breaker in the external upstream panelboard is OFF.

Recommended

(Maximum) External

Recommended Wire

Maximum Wire

Over Current

(All wires)

Accepted by

Terminal Block

UPS Model

Protection

75 degC Copper Wire

Terminal Block

Torque

GXT3-5000RT230

32A

4mm2 (10 AWG)

6mm2 (8 AWG)

2.26 Nm (20 in-lb)

GXT3-6000RT230

Terminal Block Connections

5000-6000 VA models

OUTPUT

INPUT

The UPS is equipped with a POD containing output receptacles; connect the equipment to be protected to the output receptacles.

1SLI-23185QS6_Rev0_09-2012

5000RT230, 6000RT230 specifications

The Liebert 6000RT230 and Liebert 5000RT230 are advanced uninterruptible power supplies (UPS) designed to safeguard critical electronic equipment from power disturbances and ensure uninterrupted operation. These models are ideal for applications in data centers, telecommunications, and industrial environments that require high reliability and power management.

One of the primary features of the Liebert 6000RT230 and 5000RT230 is their double-conversion online architecture. This technology provides a continuous supply of clean, reliable power by converting incoming AC power to DC and then reconverting it back to AC. This process ensures that the output power is free from surges, sags, and electrical noise, providing maximum protection for sensitive loads.

These UPS systems are equipped with highly efficient power management capabilities, featuring an efficiency rating of up to 94%. This high level of efficiency not only reduces operational costs but also minimizes heat generation, contributing to a lower overall environmental impact. Additionally, both models are designed with a compact footprint and can be easily integrated into existing infrastructure without requiring significant modifications.

Another notable characteristic is their advanced monitoring and management features. The Liebert 6000RT230 and 5000RT230 come with a user-friendly LCD display that allows users to easily monitor the status of the UPS, including input/output voltage, battery status, and load levels. They also support various communication protocols, including SNMP and USB, enabling seamless integration into network management systems.

The battery management technology in these UPS models ensures optimal battery performance and longevity. The built-in predictive diagnostics help in identifying potential issues before they lead to failures, allowing for timely maintenance. Furthermore, the hot-swappable battery feature allows for battery replacement without shutting down the load, ensuring that operations remain uninterrupted.

Both models offer flexibility in deployment, with options for rack-mounted or tower configurations, making them suitable for different environments and user preferences. The Liebert 6000RT230 model offers higher capacity options, making it particularly suitable for larger setups that demand more power.

Overall, the Liebert 6000RT230 and 5000RT230 are reliable, efficient, and feature-rich UPS solutions that provide robust power protection for critical applications, ensuring operational continuity and safeguarding investments in technology.