clear Enable LPR Printing support. It is enabled in Factory Default.
Enable IPP Printing: select or clear Enable IPP Printing support. It is enabled in Factory Default. Enable Raw TCP Printing: select or clear Enable Raw TCP Printing support. It is enabled in Factory Default and users may set the protocol’s TCP ports as following boxes:
-TCP Port 1: set TCP port for the printer of USB1 port
(default: 9100)
-TCP Port 2: set TCP port for the printer of USB2 port
(default: 9101)
Enable SMB (Server Message Block) Print/File Server: select or clear Enable SMB Print/File Server support. It is enabled in Factory Default.
Enable FTP Server: select or clear Enable FTP Server support. It is enabled in Factory Default and users may set some parameters as follows:
-FTP Port: type an integer number to set FTP
server’s TCP port (default: 21)
-Set Maximum Session Number: select or clear Set Maximum Session Number support. You can limit the FTP session number by selecting the support and type an integer to set the allowable maximum session number. If you clear the support, it means that FTP server will have not any limitation in session number.
-Set Passive Mode: select or clear Set Passive Mode support that FTP server can accept passive mode.
-Enable FTP Authentication: select or clear Enable FTP Authentication support. If you select the support, you need to type user name and password to login to the server. If you clear the support, you enter the server as anonymous login.
Enable SANE (Scanner Access Now Easy) Server: select or clear Enable SANE Server support. It is enabled in Factory Default and users may set the
49