Lancom Systems 821, 1711, 1621 manual New LAN-fully automatic configuration possible

Page 33

LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN

Chapter 3: Basic configuration

New LAN—fully automatic configuration possible

If all connected network devices are still unconfigured, the setup wizard will suggest fully automatic TCP/IP configuration. This may be the case in the fol- lowing situations:

a single PC is connected to the router setup of a new network

Fully automatic TCP/IP configuration will not be available when integrating the LANCOM in an existing TCP/IP LAN. In this case, continue with the section “Information required for manual TCP/IP configuration” on page 33.

The result of the fully automatic TCP/IP configuration: the router will be assigned the IP address '172.23.56.1' (netmask '255.255.255.0'). In addition, the integrated DHCP server will be enabled so that the LANCOM can automat- ically assign IP addresses to the devices in the LAN.

Configure manually nevertheless?

The fully automatic TCP/IP configuration is optional. You may also select man- ual configuration instead. Make your selection after the following considera- tions:

Choose automatic configuration if you are not familiar with networks and IP addresses.

Select manual TCP/IP configuration if you are familiar with networks and IP addresses, and one of the following conditions is applicable:

You have not yet used IP addresses in your network but would like to do so now. You would like to specify the IP address for your router, selecting it from the address range reserved for private use, e.g. '10.0.0.1' with the netmask '255.255.255.0'. At the same time you will set the address range that the DHCP server uses for the other devices in the network (provided that the DHCP server is switched on). You have previously used IP addresses for the computers in your LAN.

Information required for manual TCP/IP configuration

During manual TCP/IP configuration, the setup wizard will prompt you for the following information:

IP address and netmask for the LANCOM

Assign a free IP address from the address range of your LAN to the LANCOM and specify the netmask.

EN

33

Image 33
Contents Lancom 821 ADSL/ISDN Lancom 1621 ADSL/ISDN Lancom 1711 VPN Lancom Systems GmbH, Wuerselen Germany. All rights reserved Security settings PrefaceThank you for placing your trust in this Lancom product Model variants Preface Contents Installation of the MS Windows fax service Sending a fax Providing dial-up accessLinking two networks Sending faxes with LancapiSecurity checklist TroubleshootingAppendix Introduction Access to a complete local network LANHow does Adsl work? AddressesIdeal for Internet surfers All services via a single cable-thanks to the splitterCode ADSL-over-ISDN or ADSL-over-POTS?Which use does VPN offer? Conventional network infrastructure Networking via the Internet Firewall Denial-of-Service Protection Quality-of-Service / Traffic managementWhat does a router do? Areas of deployment for routers Bridgehead to the WANAt least one for WAN connections LAN to LAN coupling via VPN or IsdnRemote access to the company network via VPN or Isdn What can your Lancom do?Conventional via Isdn WAN connection Configuration Installation Package contentsSystem preconditions Introducing Lancom Status displaysFront side Top panel Meanings of the LEDsLED remains lit green Online LED indicates the overall status of all WAN ports Flashing Power LED but no connection?Connection status of the WAN connection Connection status of the Adsl linkData traffic via the Adsl link Data traffic via the DSL connectionSeparate status display for both Isdn B channels Status of the four LAN ports in the integrated switchBack of the unit Hardware installation Using the included power adapter Adsl connector cable transparent plugsStarting Lancom setup Software installationWhich software should you install? Basic configuration 1 TCP/IP settingsWhich information is necessary? Configure manually nevertheless? New LAN-fully automatic configuration possibleInformation required for manual TCP/IP configuration IP address and netmask for the LancomSettings for the DSL connection Configuration protectionSettings for the Isdn connection Enable Dhcp server?Start up LANconfig by clicking Start Programs Lancom Instructions for LANconfigLANconfig Connect charge protectionComplete the configuration with Finish Network without Dhcp server Instructions for WEBconfigStarting the wizards in WEBconfig Network with Dhcp serverOr with a name as discribed above Basic configuration Entering the password in the web browser IP address assignment via the Lancom default TCP/IP settings to workstation PCsIP address assignment via a separate Dhcp server Manual IP address assignmentBasic configuration Setting up Internet access Does the setup wizard know your Internet provider?Additional information for unknown Internet providers Protocol PPPoE, Pptp or Plain Ethernet IPoE User name and passwordAdditional connection options Dynamic channel bundling Isdn onlyTools Setup Wizard LANconfig Quick access to the setup wizardsComplete the configuration with Apply Always configure both sides Linking two networksSecurity aspects General information What information is necessary?Isdn Settings for the TCP/IP router Settings for the IPX router DNS access to the remote LANExtranet VPN Settings for NetBIOS routing Perform the configuration on both routers, one at a time Ping quick testing for TCP/IP connections Which information is required? Providing dial-up accessCoupling Entry Isdn calling line identity CLI Settings for TCP/IPWAN Settings for IPXSettings for the dial-in computer Dial-up via VPNDial-up via Isdn Instructions for LANconfig Instructions for WEBconfig Sending faxes with Lancapi Lancom CD Installation of the Lancom Capi fax modemSelect the option Printers and Faxes from the control panel Installation of the MS Windows fax serviceSend a fax with the MS Windows fax service Sending a faxSend a fax with any given office application Sending faxes with Lancapi Security settings Security settings wizardWizard for LANconfig Firewall wizard Wizard for WEBconfigSecurity checklist Configuration under WEBconfigRules Have you permitted remote configuration? Have you assigned a password for the configuration?Have you activated the Firewall? Do you make use of a ’Deny All’ Firewall strategy?Have you closed critical ports with filters? Is your saved Lancom configuration stored in a safe place?Problems with the cabling? TroubleshootingNo WAN connection is established DSL data transfer is slowUnwanted connections under Windows XP Cable testingIncreasing the TCP/IP window size under Windows LAN statisticsTroubleshooting Appendix Performance data and specificationsATM Contact assignment Adsl interfacePin RJ45 socket Ethernet WAN interface Lancom 1711 VPN ISDN-S0interfacePin RJ45 socket, corresponding to ISO 8877, EN CE declaration of conformity Configuration interface OutbandEthernet interfaces 10/100Base-T Pin mini-DIN socketNumerics IndexHardware installation 1TR6 Caller ID FirmSafe IPX conventions Flat rate IPX router SettingsInstallation Connection Connector cable Configuration port ChannelNetBIOS Power adapter 21, 27Security aspects Server Setup Specify MSN LAN to LAN coupling 17, 18, 19, 34Online Power Settings Stateful Inspection TelephoneVoltage switch WAN data VPN client WAN status Switch System preconditions Connector cable WAN connection
Related manuals
Manual 7 pages 33.19 Kb

1621, 1711, 821 specifications

Lancom Systems is a notable player in the networking solutions market, and its range of routers, specifically the 821, 1621, and 1711 models, showcases the company's commitment to delivering robust, high-quality products for various enterprise needs. Each model brings distinct features, making them suitable for different environments and operational demands.

The Lancom 821 is particularly designed for small to medium-sized enterprises (SMEs) requiring reliable internet connectivity and secure networking. This router supports various VPN technologies, ensuring secure data transmission across the organization. Equipped with advanced firewall capabilities, the 821 can handle multiple connections while protecting against potential cyber threats. Its support for IPv6 enhances compatibility with future networks, making it a long-term investment. The device’s manageable architecture allows for remote access and troubleshooting, reducing the need for on-site IT interventions.

On the other hand, the Lancom 1621 is tailored for larger organizations or those with more extensive networking demands. This model offers enhanced throughput and is capable of managing large volumes of traffic without compromising performance. It features a variety of WAN connection options, including DSL, LTE, and fiber, allowing businesses to choose the best solution for their requirements. The 1621 also incorporates sophisticated Quality of Service (QoS) settings, which prioritize critical applications to ensure optimal performance during peak times. Built-in redundancy features enhance reliability, making it an excellent choice for mission-critical applications.

The Lancom 1711 takes networking capabilities a step further, targeting enterprises with even more complex needs. It boasts advanced routing and switching features, making it suitable for enterprise-grade deployments. The 1711 supports enterprise WLAN management, allowing seamless integration with wireless access points. Its robust performance over WAN connections enables the deployment of various real-time applications, such as voice over IP (VoIP) and video conferencing, without latency issues. Security is a top priority, with features including an IPSec VPN and integrated threat detection to safeguard organizational data.

In summary, the Lancom 821, 1621, and 1711 routers serve as versatile tools for businesses, each designed with distinct capabilities to meet specific networking needs. Their strengths lie in their security features, support for various connection types, and reliable performance under heavy loads. With these devices, organizations can ensure that their network infrastructure not only meets current demands but is also poised for future growth.