Lennox Hearth AX45Q manual Bootup Num-Lock, Wait For F1 If Error, Hit DEL Message Display

Page 69

 

User’s Manual

Option

Description

Disabled

Set this value to allow the computer system to display the POST messages.

Enabled

Set this value to allow the computer system to display the OEM logo. This is the

 

default setting.

yBootup Num-Lock

Set this value to allow the Number Lock setting to be modified during boot up. The default setting is On.

Option

Description

Off

This option does not enable the keyboard Number Lock automatically. To use

 

the 10-keys on the keyboard, press the Number Lock key located on the upper

 

left-hand corner of the 10-key pad. The Number Lock LED on the keyboard will

 

light up when the Number Lock is engaged.

On

Set this value to allow the Number Lock on the keyboard to be enabled

 

automatically when the computer system is boot up. This allows the immediate

 

use of 10-keys numeric keypad located on the right side of the keyboard. To

 

confirm this, the Number Lock LED light on the keyboard will be lit. This is the

 

default setting.

 

 

yWait For “F1” If Error

Set this value to allow the Wait for “F1” Error setting to be modified. The default setting is Enabled.

Option

Description

Disabled

This prevents the to wait on an error for user intervention. This setting should be

 

used if there is a known reason for a BIOS error to appear. An example would

 

be a system administrator must remote boot the system. The computer system

 

does not have a keyboard currently attached. If this setting is set, the system will

 

continue to boot up in to the operating system. If “F1” is enabled, the system will

 

wait until the BIOS setup is entered.

Enabled

Set this value to allow the system BIOS to wait for any error. If an error is

 

detected, pressing <F1> will enter Setup and the BIOS setting can be adjusted

 

to fix the problem. This normally happens when upgrading the hardware and not

 

setting the BIOS to recognized it. This is the default setting.

yHit “DEL” Message Display

Set this value to allow the Hit “DEL” to enter Setup Message Display to be modified. The default setting is Enabled.

Option

Description

Disabled

This prevents the to display

 

Hit Del to Enter Setup

AX45Q User’s Manual 69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Ver Intel Q45 LGA775 socket for Intel Core2 Quad ATX MotherboardContents User’s Manual Managing and updating your BiosElectrical safety Safety informationAbout this guide Command TypographyAwdflash Filename Specifications AX45Q specifications summaryPower Type Operating Temperature Introduction Welcome Package contentsProduct highlights Special featuresIntel Stable Image Platform Program Faster System PerformanceIntel I/O Controller Hub 10 Intel ICH10DO Dual-channel DDR2 memory support Temperature, fan, and voltage monitoring+2-CH high definition audio Serial ATA technologyBefore you proceed Placement Direction Motherboard overviewScrew Holes Motherboard Layout Central Processing Unit CPU Installing the CPUAX45Q User’s Manual Installing the CPU Heatsink and Fan User’s Manual Uninstalling the CPU Heatsink and Fan User’s Manual Overview System memoryMemory Configurations Installing a Dimm Removing a Dimm Installing an Expansion Card Configuring an Expansion CardExpansion slots PCI Express PCI slotsClear RTC RAM Clrtc Jumpers3 RS232/422/485 Select JSETCOM1, JSETCOM2 2 COM1/2 Voltage Select JCOMPWR5, JCOMPWR6Intruder Select CHASSIS1 Connectors Rear panel connectorsLAN port LED indications Front panel audio connector 10-pin AAFP1 Internal connectorsUser’s Manual Serial Port connector COM2 Fan Connectors 3-pin SYSFAN, 3-pin, 4-pin CPUFAN, Chafan Page ATX power connectors 20-pin EATXPWR, 4-pin ATX12V Power/Soft-off button Black 2-pin Pwrsw System panel connector 10-1 pin FPANEL1Reset button Blue 2-pin Reset System Power LED connector 2-pin PwrledDigital Audio connector 4-pin Spdifout Hard disk drive activity Red 2-pin IdeledDigital IO Connector 12-pin Jdio User’s Manual SPI Connector 7-pin SPI1Bios Setup2 Managing and updating your Bios Creating a bootable floppy diskStart Keys Function Description Bios setup programSub-menu List BoxSystem Time/System Date Main SetupAdvanced Bios Setup Execute-Disable Bit Capability CPU Configuration SettingMax Cpuid Value Limit Intel Virtualization TechIntel SpeedStep tech User’s Manual Core Multi-ProcessingMirrored Ider Configuration IDE Configuration SettingSata Configuration Configure Sata asOption Description IDE Detect Time Out SecAhci CD/DVD Boot Time Out Ahci Configuration Ahci Bios SupportSerial Port1 Address User’s Manual SuperIO ConfigurationSerial Port2 Address Hardware Health ConfigurationCPU Temperature System TemperatureUser’s Manual Chassis Intrusion Cpufan SpeedAcpi Configuration High Performance Event Timer User’s Manual Chipset Acpi ConfigurationPower Management/APM APM ConfigurationRestore on AC Power Loss Throttle Slow Clock RatioIntel Danbury DT Configuration Resume RTC AlarmUser’s Manual Resume On PME# Resume On Pcie WAKE#Intel TXT Initialization Intel TXT LT ConfigurationIntel VT-d User’s Manual Intel VT-d ConfigurationExecute TPM Command Trusted ComputingTCG/TPM Support Advanced PCI/PnP Settings Clear NvramPlug & Play O/S PCI Latency Timer Allocate IRQ to PCI VGAPalette Snooping OffBoard PCI/ISA IDE Card PCI IDE BusMasterInterrupt Option 8 IRQ9 DMA DMA Channel OptionBoot Setting Configuration Boot Settings Configuration Quick BootQuiet Boot Bootup Num-Lock Wait For F1 If ErrorHit DEL Message Display 1st Boot Device Boot Device Priority1st Drive User’s Manual Hard Disk DrivesChange Supervisor Password Security SetupChipset Setup Memory Remap Feature North Bridge ConfigurationVideo Function Configuration Dvmt Mode Select IGD Graphics Mode SelectUser’s Manual Initate Graphic Adapter PEG PortSouth Bridge Configuration DVMT/Fixed Memory SizeUSB Functions OnBoard LAN Boot ROM User’s Manual USB Port ConfigurePcie Ports Configuration Option Description OnBoard LAN1Exit Menu User’s Manual Save Changes and Exit Discard Changes and Exit User’s Manual Discard Changes Load Setup Default

AX45Q specifications

The Lennox Hearth AX45Q represents a remarkable advancement in the world of home heating solutions, combining modern technology with aesthetic appeal. Designed for optimal performance and efficiency, this gas fireplace offers a cozy atmosphere without compromising on style.

One of the standout features of the AX45Q is its sleek, contemporary design. The firebox is framed with a large viewing area, providing an impressive 45-inch fire display that captures the eye. The glass front complements any modern home décor, ensuring that the fireplace serves as a stunning focal point in the living space. Owners can choose from a variety of trim finishes, allowing for a customized look that fits seamlessly into the home.

Equipped with advanced heating technology, the AX45Q is engineered to provide warmth while maximizing energy efficiency. The fireplace boasts an impressive efficiency rating, which means less fuel consumption and reduced environmental impact. This high efficiency is attributed to its innovative burner design that promotes consistent and efficient heat output. It provides an ample amount of warmth, making it suitable for even larger rooms.

The AX45Q features the exclusive Lennox Heat Management System, which allows for control over heat distribution. This system intelligently directs heat where it’s needed most, enhancing comfort while reducing the need for additional heating sources. This is particularly beneficial for open-concept living areas where temperature regulation can be challenging.

Another notable characteristic is the advanced ignition system. It ensures reliable ignition, so homeowners can enjoy their fireplace at the push of a button without the hassle of manual lighting. The unit is also equipped with a remote control, offering convenience and ease of use for adjusting flame height and heat output.

Safety is a priority with the AX45Q, as it includes a screen for protecting against embers and an automatic shut-off feature that activates in case of emergencies, providing peace of mind for homeowners.

In summary, the Lennox Hearth AX45Q is the perfect blend of style, efficiency, and advanced technology. From its modern design and large viewing area to its high efficiency and safety features, it sets a new standard for gas fireplaces, making it an excellent addition for any modern home looking to combine warmth with aesthetic charm.
Top Page Image Contents