LaCie 2big network manual QIG2big-Network070723.indd 23/07 120222 PM

4.Windows: Insert the CD-ROM and install the LaCie Ethernet Agent. When installed, the Ethernet Agent is accessible from the system tray.

Mac: Install and run the LaCie IP Configurator Software, located on the included CD-ROM.

5.Windows: Open LaCie Ethernet Agent. When your 2big Network is found, click on “Navigate to www” to configure it.

Mac: Follow the steps indicated by the Wizard. When your 2big Network is found, select Connect.

6.The administration page will open in your web browser. Enter:

Username: admin

Password: admin

Click OK and start configuring your drive.

TECHNICAL NOTE: The LaCie 2big Network is configured in Big mode. Please see the detailed User Manual on the LaCie Storage Utilities CD-ROM if you want to change the RAID mode to Safe mode (mirroring).

QIG_2big-Network_070723.indd 5

7/23/07 12:02:22 PM