Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at

1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the detachable front panel if it is attached to the chassis by pushing the “Release” button. Slide the mount- ing sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough,carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the open- ing or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary. CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from

the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully unsnap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION:DONOTEXCEEDM5X8MMMAXIMUMSCREWSIZE. LONGERSCREWSMAYTOUCHANDDAMAGE COMPONENTSINSIDETHECHASSIS.

4.Wire the new radio to the vehicle as per step 4 of the Universal Installation Procedure.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

ACD-28A specifications

The Audiovox ACD-28A is a remarkable portable CD player designed to cater to the needs of music enthusiasts who appreciate both functionality and sound quality. Compact and lightweight, the ACD-28A is an ideal companion for individuals who enjoy listening to their favorite CDs while traveling or during leisure activities.

One of the standout features of this CD player is its anti-shock technology. This innovation ensures uninterrupted playback even while on the move, significantly reducing the chances of skips or interruptions due to jolts and vibrations. Users can confidently enjoy their music during commutes or while engaging in outdoor activities without worrying about the CDs being compromised.

Another key characteristic of the ACD-28A is its versatility in playback options. Apart from standard audio CDs, the player supports CD-R and CD-RW formats, allowing users to explore their custom playlists. This flexibility caters to diverse listening preferences, making it an excellent choice for those who create and burn their own CDs.

The Audiovox ACD-28A is equipped with a user-friendly interface, featuring an easy-to-read LCD display that shows essential information such as track number and playback mode. The control buttons are intuitively placed, allowing for effortless navigation through tracks or quick adjustments to volume levels. Additionally, the device's battery life is commendable, offering several hours of continuous playback on a single charge, making it suitable for extended use.

Moreover, the ACD-28A is designed with audio quality in mind. Its built-in headphone jack provides the option to connect headphones for a more personal listening experience. The player also features an equalizer function, allowing users to adjust the sound settings according to their preferences, ensuring a tailored audio experience for every listener.

The overall build of the Audiovox ACD-28A showcases a blend of durability and aesthetic appeal, with a sleek design that fits easily into bags or backpacks. The robust casing provides protection against everyday wear and tear, ensuring that the device remains functional for years.

In summary, the Audiovox ACD-28A is a sophisticated portable CD player that combines innovative technology with user-friendly features. From its anti-shock protection to versatile playback capabilities and high-quality audio output, this device is perfect for music lovers seeking convenience and performance in their listening experiences.