POWERED BY
Model: PPUCLIP
PowerPort™ Clip USB Battery Charger
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR YOUR UNIT.
Caution
•The product provides current and voltage surge protection as well as short- circuit protection and is suitable for charging 3.6 & 3.7V lithium batteries
•Do not leave the charger in wet conditions or under high temperatures
•It is normal for the charger to become warm when in use; this will not damage the battery
•Do not charge
Instructions
1
2
Y
R
E
T
T
A
B
3
Specifications
Battery Type: Rechargeable
Power: DC 5V USB interface Model A
Voltage: DC5.0V 
0.25V for input and DC4.2 
0.005V for output
Charging Current: MAX 500mA
Working Environment: Temperature
Size: 47mm x 26.5mm x 27mm
Weight: Approx. 11g
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are non- transferable.The warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to equipment or by normal wear and tear.
1Flip up the USB connector on the PPUCLIP.
2Press the back of the top cover to open the PPUCLIP.
3Slide the battery towards the PPUCLIP’s contacts, adjusting them so that one contact touches the positive (+) terminal of the battery and the other touches the negative
4When the battery is installed correctly and making proper contact the green LED will turn on.
5Insert the USB end of the PPUCLIP into any USB port. Both the red and green LEDs will turn on indicating the battery is charging.
ALL WARRANTY REQUESTS MUST BE SUBMITTED AT:
www.lenmar.com/warranty
INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED PRODUCT OR THE CLAIM WILL BE DENIED.
Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:
-The company where the product was purchased
-The date of purchase
-The model number of the product purchased
-Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).
Include $7.50 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States.
Include $12.50 for ship to address in Hawaii, Alaska or Canada.
Send to:
Lenmar Battery Solutions Attn: Return Department 4035 Via Pescador Camarillo, CA
Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or call
6The red LED will gradually dim as the battery reaches a full charge. When the battery reaches a full charge, the red LED will turn off and the green LED remains on, indicating a full charge.