Windows Hardware Driver Installation | Lava Computer SP-PCI specification

Windows Hardware and

Driver Installation

1.Before opening the casing of your computer, make sure that all power is off.

2.Locate an unused PCI slot and insert the SP-PCI card into it. Ensure that the card is well seated.

3.Screw the metal bracket of the SP-PCI card to your PC’s casing and replace the machine’s cover.

4.Turn the PC on.

5.When Windows starts, it will find an SP-PCI Controller and will ask you for a driver for this device. When prompted, insert the installation diskette into your floppy drive. After copying the necessary files from the diskette,Windows may restart your PC in

Screw for attaching card bracket to PC casing

Serial Port

Parallel Port

PCI Slot