The total power consumption must not exceed 500 mA otherwise it is possible that some devices will not function properly or not function at all. The power consumption of the webcam amounts to 140 mA.
Connecting the headset:
•Insert the red and green plugs 0 from the headset into the red and green sockets q on the Hub.
Connecting the webcam:
•Insert the USB plug 4 into the USB connector e on the top of the Hub. This will be recognized by the computer and the following message appears on the bottom right of the screen: „Found new hard- ware“. It could be a few minutes before the message appears to indicate that the webcam has been installed and is ready for use.
Info: The webcam has built in object lighting (4 white LEDs next to the lens). These switch on and off automatically according to the lighting circumstances. For this no connections or settings are required.
Device use
When the device has been properly installed it is registered as such in the PC. Applications, which need this device as, for example, internet telephones or a video chat programme, and are automatically accessed. The operation then arises from the respective application.
Hub use:
•The operation of the Hub is restricted to the connecting and discon- necting of the respective USB device. Whether this is also possible in the current operation is solely dependent on the computer and
- 8 -