Operating instructions

Loading and unloading discs

1.Press the Open/Close button.

2.When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up.

3.To close the disc tray, press the Open/Close button again. When the tray, with a correctly loaded disc, is fully closed the CD player will read the disc and display the content information.

4.The disc tray can be opened at any time by pressing the Open/Close button. Only remove the disc after the tray has fully opened.

Note:

–Do not put anything except a compact disc into the tray. Foreign objects may damage the mechanism.

–Do not force the tray by hand during the opening and closing operations.

–To avoid dirt and dust entering the mechanism, keep the disc tray closed.

–If the compact disc is badly scratched or too dirty, the player may not be able to read it or play it.

–Never load more than one disc into the disc tray at any time.

Normal disc play

This unit has been designed to play compact discs,

recordable CDs (CD-R) and re-writable CDs (CD-RW) bearing

the identification logo shown here. No other discs can be used. The CD-R/CD-RW discs should contain properly recorded TOC (Table of Contents) information so that they can be played

back. This unit can play only the discs recorded in the CDDA format designed for music reproduction or those containing MP3 or WMA files. Do not attempt to play a disc on this unit containing other data, such as a data CD-ROM for PCs.

1.Switch on your amplifier and set its input selector to the correct position. Adjust the volume control to a minimum.

2.Press the Open/Close button to open the disc tray and load a disc.

3.Press the Open/Close button again to close the tray. The CD player will read the disc.

4.To begin playback, press the button.

5.When the last track has finished playing, the display will return to Table of Contents (TOC).

6.To stop the disc at any point, press the button. Pressing the button while the disc is playing will pause the disc. Playback can be resumed by pressing button.

Locating a specific track during playback

1.A single short press of the button will take you to the beginning of the next track on the CD. Repeat as necessary.

2.A single short press of the button will take you to the beginning of the previous track.

Locating a specific track when playback is stopped

1.A single short press of the buttons will skip between tracks.

2.Press to start playback from the selected track.

Repeating discs and tracks

1.Ensure that the disc is loaded.

2.To repeat a specific track, press the Repeat button on the remote. ‘RPT ONE’ will appear on the display. Press and the selected track will now repeat until the function is turned off. Alternatively, press the Repeat button, select the chosen track using the numerical buttons on the remote control and press .

3.Press the Repeat button twice on the remote control. ‘RPT ALL’ will appear on the display. Press . The whole disc will now be repeated until the function is turned off.

CD 5

CD10

4.To turn the Repeat function off, press the Repeat button either before or during playback until ‘RPT OFF’ appear on the display.

Playing tracks in random order

1.Ensure that a disc is loaded.

2.Press the Random button on the remote control. ‘RAN ON’ will appear on the display.

3.Press . The CD player will now play the entire disc in random order. It is also possible to press the Random button during playback to listen to tracks in random order.

4.Press the Random button to exit. The disc will continue playing to the end in the correct order.

5.Press the button at any time to stop the disc.

Note: Selecting ‘Random’ mode when ‘RPT ONE’ has been selected will automatically cancel ‘RPT ONE’ mode.

Using the Remain function

1.Ensure that the disc is playing.

2.Press the Remain button on the remote control once to display the time remaining for the track playing.

3.Pressing the Remain button the second time will show the total remaining disc time.

4.Press the Remain button again either before or during playback to return to normal play mode.

Programming disc play

It is possible to program the CD5/CD10 to play back in any order only the tracks you wish to listen to.

1.Ensure that a disc is loaded. The display should show the TOC data.

2.Press the Prog button on the remote control. The Program set-up will appear on the display.

3.Use the buttons or enter the track number that you want to program as your first track.

4.Press the Prog button on the remote. The desired track is now programmed. The program number automatically increases by one for the next entry.

5.Repeat steps three and four until all your desired tracks are entered. A maximum of 20 tracks can be programmed.

6.Press the button to begin programmed playback.

7.Press the Prog Clear button on the remote to clear all programmed tracks.

ENGLISH

CD10 specifications

Cambridge Audio, a prominent name in high-fidelity audio equipment, has continued to impress enthusiasts with its commitment to sound quality and innovative technology. One of their noteworthy products, the Cambridge Audio CD10, stands out as a versatile and robust CD player designed to offer an exceptional listening experience.

The Cambridge Audio CD10 showcases a sleek, modern design that combines functionality and aesthetic appeal. Its minimalist front panel features a simple yet elegant display and intuitive controls, allowing users to navigate their music effortlessly. The CD player is compact in size, making it a perfect fit for both traditional audio setups and contemporary media centers.

At the heart of the CD10 is its high-quality digital-to-analog converter (DAC), which plays a crucial role in ensuring that music is rendered with clarity and precision. Cambridge Audio has utilized advanced technologies to create a player that delivers a natural and engaging sound. The CD10 supports various CD formats, including standard audio CDs and CD-R/RW discs, providing versatility for users who may have extensive collections.

One of the standout features of the Cambridge Audio CD10 is its robust build quality. The chassis is designed to reduce resonance and vibration, which can negatively impact audio fidelity. This attention to detail ensures that the CD player maintains optimum performance whether it’s being used in a quiet home environment or as part of a more dynamic audio setup.

Additionally, the CD10 integrates seamlessly with other Cambridge Audio products, allowing for a cohesive audio experience. The player includes multiple outputs, including both optical and coaxial digital outputs, enabling connection to various external devices for enhanced audio capabilities. This feature is particularly advantageous for users who wish to integrate the CD10 into a more extensive home theater or music system.

For those seeking analog connections, the CD10 offers stereo RCA outputs, making it easy to connect to a range of amplifiers or receivers. Furthermore, the device is designed for user-friendly operation, with a clear remote control option that enables convenient access to all functions.

In conclusion, the Cambridge Audio CD10 is a well-crafted CD player that excels in delivering high-fidelity sound and user-friendly performance. Its combination of advanced technology, durable construction, and thoughtful design makes it an excellent choice for audiophiles and casual listeners alike, ensuring that every listening session is a memorable experience.