Intellinet Network Solutions 524537 user manual Connection Filtering Configuration

the Internet (by selecting “Permit” or “Deny” from the drop-down menu. NOTE: Enter the

12-digit MAC address in this format: XX-XX-XX-XX-XX-XX (with the hyphens).

Add — Click after filling in the fields to add the rule and display the Current MAC Filtering Table, which shows the valid MAC filtering rules in the router. To remove a listing from the table, select it and click “Delete.”

Apply — Click “Apply,” then “Save” to set and save any changes.

3.6.2 Connection Filtering Configuration

This screen lets you control a certain client PC’s access to the Internet based on IP addresses, application types (i.e., HTTP port) and time of day.

Stop — Click to turn off the Connection Filtering configuration when “Status” shows “enabled”; click (“Start”) to turn on the configuration when it’s shown as “disabled.”

Check Box — If selected, the undefined item in the IP Address list is allowed Internet access. Rule Name — Enter any name you want to use for identification.

Source IP address— Enter the IP address you want to apply this Access Control rule to. Protocol — Select the protocol type: TCP, UDP, FTP, HTTP or all of them.

Destination Port — Assign a port number or a port range. The router will block clients from accessing Internet services that use these ports.

Days To Block — Select days to block. Times To Block — Select times to block.

Add — Click after filling in the fields to add the rule and display the Current Access Control

Table, which. shows the current Access Control rules in the router. To remove a listing from the table, select it and click “Delete.”

Apply — Click “Apply,” then “Save” to set and save any changes.

18