Rear Panel | 7 |
Rear Panel
|
|
| A C P o w e r | P o w e r S w i t c h | ||||
|
|
| C o n n e c t o r | |||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fan Unit | MDI / MDI - X | Fan Unit | Fuse (250V, 2A) |
Configuration Table |
Figure 2 – KNS1600/R Rear Panel
Power Switch
The AC Power switch turns the unit kj or kbb. If the PWR LED does not light up when the unit is turned on, please check the following:
1.Try a different AC power outlet.
2.Check the external fuse located in the back of the unit (below the AC power connector.) If the fuse is blown, replace it with the spare fuse provided with the unit (located below the AC power connector).
3.The power supply may be defective. Return the unit for replacement.
)WARNING: For safety reasons, DO NOT attempt to open and service the unit. There are no
AC Power Connector
The Fast EtheRx switch uses an
Fuse
The Fast EtheRx switch comes equipped with a 250V (2 Amp max.) external fuse and one spare fuse. Both fuses are located in a fuse holder located just below the AC power connector on the back of the unit.
Fuse (250V, 2A)
S p a r e
F u s e
Fan Units
The Fast EtheRx Switch uses two independent cooling fans for optimum
KNS1600/R User’s Guide - Rev. A00 | Kingston Technology Company |