Kingston Technology KNE24TX/RS, KNE12TX/RS UTP Port LEDs, Utilization LEDs, UTP and Uplink Ports

Page 12

Hardware Installation

7

UTP Port LEDs

The UTP Port LEDs indicate Link, Activity, Error, and Partition status. If a good link is established on any given port, the green LED will be continuously lit, indicating a valid network connection between the network node and the hub. When data is received, the LED will flash green. If the port is partitioned or encounters an error, such as jabber, false carrier, misalignment, or invalid packet, the LED will flash amber.

If an LED does not indicate a good link, check the following:

1.Make sure the power is turned on for both the PC and Fast EtheRx Hub. The power LED should be lit.

2.Verify the network drivers have been loaded on the PC. Some adapters require the drivers to be loaded to establish a proper link.

3.Make sure the cable is wired properly and connected on both ends.

4.If steps 1, 2, and 3 are correct, the cable may be defective or not wired correctly. Replace the cable and try again. Please refer to Appendix A for pin assignments and Appendix B for cabling guidelines.

Utilization LEDs

There are five utilization LEDs to display the amount of network traffic in five percentage levels. The amount of data traffic is measured in frames per second (FPS), then calculated into the following percentage forms: 1%, 12%, 25%, 50%, and 100%. The appropriate LED will light based on the network activity.

UTP and Uplink Ports

The UTP ports on the front panel, numbered 1 through 8 (KNE8TX/RS), 1 through 12 (KNE12TX/RS), or 1 through 24 (KNE24TX/RS), support 100BASE-TX connections. Since the crossover function is implemented on all UTP MDI-X ports, a straight-through cable should be used to connect to a workstation. The last UTP port on each model has two (2) RJ-45 connectors for support of cabling in the crossover and straight-through configuration.

Only one of the two ports, MDI-X or MDI (

or

 

 

), may be used.

 

 

 

KNE24TX/RS User’s Guide - Rev. A01

Kingston Technology Company

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 100BASE-TX 19 RACK-MOUNTABLE Page Important Safety Instructions Part No -001.A01Wichtige Sicherheitshinweise Table of Contents Introduction Order Information Accessories Model TypesSpecial Features Package ContentsError-Handling Repeater FunctionsJabber Lock-up Protection Collision-HandlingPower LED Front PanelAutomatic Partitioning / Reconnection Collision LEDUTP Port LEDs Utilization LEDsUTP and Uplink Ports Using a Straight-Through Cable Using a Crossover Cable ConfigPower Switch AC Power ConnectorRear Panel Fan UnitsStacking Fast EtheRx Hubs Stacking Additional HubsInstalling the 100FX Module Optional Model KNE100FX/RSC with SC connectorsAppendices Appendix a Pin Assignments UTP Port Pin AssignmentsPage UTP Cable Wiring Appendix B Cabling GuidelinesCable Type Cable Wiring Standards T568AUTP Cable Rating Codes Terms You Should Be Familiar WithAppendix B Cabling Guidelines Appendix C Specifications Fast EtheRx Models KNE8TX/RS, KNE12TX/RSSpecifications Appendix C Specifications Appendix D Commonly Asked Questions Class I vs. Class II 100BASE-TX Fast Ethernet RepeatersCategory 5 Compliance vs. Category 5 Performance? Appendix E Mounting Templates Rubber Feet for DesktopsBrackets for Rack Mounting Limited Warranty Statement Duration of WarrantyWarranty Claim Requirements Free Technical SupportDisclaimers C. Certification CE Notice

KNE8TX/RS, KNE24TX/RS, KNE12TX/RS specifications

Kingston Technology has long been a trusted name in memory and storage solutions, and its KNE series network adapters, namely the KNE12TX/RS, KNE24TX/RS, and KNE8TX/RS, showcase the company's commitment to high-performance networking technologies. These adapters are designed to enhance network connectivity and provide reliable performance for a range of applications, from home office setups to enterprise-grade environments.

The KNE12TX/RS is engineered for high-speed data transfer, featuring a 10/100 Mbps Ethernet connection that ensures seamless access to the network. With its Plug and Play functionality, users can quickly install the adapter without the need for extensive configuration, making it ideal for those who prefer straightforward solutions. This model supports various operating systems, allowing for versatile usage across multiple devices.

Moving on to the KNE24TX/RS, this adapter is designed for environments requiring more robust performance. It offers dual-channel technology, allowing for simultaneous data transmissions that significantly enhance overall network speed and efficiency. This feature is particularly beneficial in busy network settings where multiple devices are accessing the system at once. The KNE24TX/RS also includes advanced error detection and correction capabilities, ensuring data integrity during transfers.

Completing the series, the KNE8TX/RS caters to users looking for a balance between performance and cost-effectiveness. It provides essential features, such as a simple installation process and reliable connectivity options, making it suitable for basic networking needs. This adapter supports both wired and wireless connections, giving users flexibility in how they choose to link their devices to the network.

All three models incorporate Kingston's commitment to quality and reliability. Each adapter is built with durable materials to withstand daily use, and they are backed by Kingston's reputable customer support. Additionally, they come with a limited warranty, which reflects the company's confidence in the longevity and reliability of their products.

In conclusion, the Kingston Technology KNE series network adapters—KNE12TX/RS, KNE24TX/RS, and KNE8TX/RS—are designed to meet various networking needs, from individual users to enterprise environments. With features such as easy installation, robust performance, and exceptional reliability, these adapters are well-suited for enhancing network connectivity and ensuring efficient data transfer. Whether for home use or professional settings, Kingston's KNE series provides a solid solution for improving network performance.
Top Page Image Contents