Key Digital ES381 manual This is a safety critical point so please note it carefully

Page 9

Repeat this for all except the last counter to be stacked.

For the last counter in the stack, do the same as above but use the short length connector. This time, the pins are shorter so they stop well inside the counter’s case. This counter MUST be the bottom counter in the stack. The reason for this is that if you use the long connector, the pins could be shorted out accidentally, or you may touch the pins when the counter is connected to a high voltage and you could get an electric shock! Similarly, if you plan to use only one counter, make sure there is no stack connector fitted or the shorter connector type is fitted.

This is a safety critical point so please note it carefully.

Now you can assemble the stack.

Elan Digital Systems Ltd.

9

USBcount50 USER’S GUIDE Iss1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents USER’S Guide Contents Software Page Overview General Figure below shows a simplified diagram of the USBcount50 Using More Than One USBcount50 This is a safety critical point so please note it carefully Disassembling The Stack USB Connections For Stacked Configurations USBcount50 USER’S Guide Iss1 Stacking Do’s And Don’ts USBcount50 /MISpc USBcount50 USER’S Guide Iss1 Input Control Counter Modes USBcount50 USER’S Guide Iss1 Frequency Mode Falling Falling Rising Falling Rising Rising USBcount50 USER’S Guide Iss1 Before plugging in the hardware 2 channel example is shown USBcount50 USER’S Guide Iss1 Windows 2K and XP10 13 a 1 channel example is shown USBcount50 USER’S Guide Iss1 Troubleshooting Power Requirements Performance Performance Software
Top Page Image Contents