Hypertec PCI 10/100 TX manual Static Electricity Warning

Page 5

If you do not have each of these items, contact your supplier before proceeding further.

Static Electricity Warning

Static electricity is accumulated naturally in the human body, and can be discharged through electrical components by touching them. This shock can potentially cause permanent internal damage to the component.

When installing the adapter, please observe the following precautions:

Discharge yourself before commencing by touching a grounded metal appliance, such as the metal frame of a computer - while it is tuned off, but still plugged into the wall socket.

Hold the adapter or any other boards by their edges only. Never touch any exposed pins on the adapter.

If possible, install the adapter as soon as you remove it from its anti-static bag, without putting it down. If you must put it down, place it on the anti-static bag in which it was packed.

Do not place the adapter on any metal surface.

Image 5
Contents User Guide Copyright Page Features Static Electricity Warning For 10Base-T Ethernet networks Connecting to the NetworkPCI Computer without PnP Self-Configuration Configuring the PCI 10/100 AdapterPCI Computer with PnP Auto-Configuration Checking card operation FD X Full-D uplexPage Adapter cannot connect to the network Network cabling Figure B-1 show the Unshielded Twisted Pair WiringPage Operating Temperature LED IndicatorsConnector Operating HumiditySales@hypertec.co.uk