Huawei v200r001 Executing Modem Script Manually, Specifying the Event to Trigger Modem Script

User Manual - Configuration Guide (Volume 3)	Chapter 2
Versatile Routing Platform	Configuration of Modem Management

For specific format of script, please refer to Modem script syntax.

2.3.4 Executing Modem Script Manually

The start-chat command can be used, when necessary, to execute the specified Modem script, in order to manage the Modem externally connected with the interface.

Perform the following task in asynchronous serial port mode.

Table DC-2-5Manually execute modem script

Operation	Command
Manually execute Modem script	start-chat script-name

2.3.5 Specifying the Event to Trigger Modem Script

Relate modem script to events, that is, the router will automatically execute corresponding script when a specific event occurs. In VRP1.4, the script events supported include:

zWhen the call-out connection of the line is established successfully: execute the specified script when the modem call-out connection is established successfully.

zWhen the call-in connection of the line is established successfully: execute the specified script when the modem call-in connection is established successfully.

zDDR dialing: start the dial script during DDR dialing.

zLine reset: execute the specified script when the line is disconnected.

zSystem power on and reboot: execute the specified script for corresponding asynchronous serial port during system power on and initialization.

The script command may be used to specify corresponding scripts for all the above events.

Perform the following task in asynchronous serial port mode.

Table DC-2-6Specify events triggering modem script

Operation	Command
Specify the modem script to execute when call-out connection of	Script activation script-name
the line is established successfully
Specify the modem script to execute when call-in connection of	Script connection script-name
the line is established successfully
Specify the modem script to execute during DDR dialing.	Script dialer script-name
Specify the modem script to execute during line reset	Script reset script-name
Specify the modem script to execute during system power on and	Script startup script-name
reboot
Specify the default modem initialization string	Script init-string init-string

2.3.6 Configuring Modem Answer Mode

Perform the following task in asynchronous serial port mode.

2-4