Huawei V100R001 manual Select Enable for WAN connection, Select Internet from the Service list

Page 12

Step 1 Verify the HG533 and the PC have connected properly, and the PC has obtained the IP address.

Step 2 Log in to the web-based configuration utility of the HG533. Step 3 Enable the embedded dial-up function.

1.In the navigation tree on the left of the web-based configuration utility, choose Basic > WAN.

2.Select Enable for WAN connection.

3.Enter the VPI and VCI parameters that are provided by the network operator in the VPI/VCI text boxes.

4.Select INTERNET from the Service list.

5.Select PPPoE from the Connection type drop-down combo box.

6.Enter the user name and password that are provided by the network operator in the User name and Password text boxes.

7.Keep the default settings of other parameters.

8.Click Submit.

After completing the preceding configuration steps, you can begin browsing the Internet.

You only need to perform the preceding operations on a computer once. The next time you boot up your computer, you can browse the Internet without performing the same configurations.

2.2.2Accessing the Network through the PPP Dial-Up Software on Your Computer

If you select this method for accessing the network, you need to install and configure the dial-up software on your computer. In addition, you need to perform dial-up operations on your computer upon each startup.

To configure the HG533 and your computer for the network access, do as follows:

Step 1 Set the working mode of the HG533 to Bridge.

1.Log in to the web-based configuration utility of the HG533.

2.In the navigation tree on the left of the web-based configuration utility, choose Basic > WAN.

7

Page 11 Page 13
Image 12
Page 11 Page 13
Contents User Guide V100R001 No Warranty Contents Configuring the Commonly Used Functions Maintenance GuideFAQs Appendix Connecting the Cables and Getting Started Connecting Cables Using the Adsl InterfaceConnecting Cables Using the WAN Interface Getting startedConnecting Cables Using the USB Interface Getting Started Setting Network-Access Parameters Logging In to Web-based Configuration UtilitySetting the Parameters When Accessing Network through Adsl Selected, clear Use the proxy server for your LAN, and thenSelect Enable for WAN connection Select Internet from the Service listSelect Enable for WAN connection Select PPPoE from the Connection type drop-down combo box Page Page Select Internet from the Service list Click Submit Accessing the Network Wirelessly Setting Up a Wireless Connection by Pressing ButtonsSetting Up a Wireless Connection Manually Set the Wlan and Wlan access password of the HG533Page Close the Wireless Network Connection dialog box Configuring the Commonly Used Functions Enabling or Disabling the Wireless Network FunctionUsing the Home Storage Function Choose Advanced USB Port SambaPlaying Media Files on a Portable Storage Device Choose Advanced DlnaPower Saving Choose Advanced Power SavingMaintenance Guide Click SubmitChanging the Wireless Network Name and the Access Password Changing the PIN code for your SIM cardClick Submit Restoring Default Settings Click Restore Default SettingsFAQs Page Choose Tools Internet Options Ensure that telephone lines are properly connectedPlace your computer close to your terminal Indicators Indicator Status DescriptionAppendix Wlan Interfaces and Buttons LAN4Default Settings Parameter SettingInterface Description Or Button Technical Specifications Parameter Setting Wireless network function EnableSpecification
Top Page Image Contents