Huawei manual Connecting the E219 with a PC, What does the blinking LED on the modem indicate?

Q : What does the blinking LED on the modem indicate?

A :

LED	Status	Definition
Indicator
	Blinking (on for 100ms and	The modem is powered on
Green	off for 100ms; then on for
	100ms and off for 2700ms)
Green	Blinking (on for 100ms and	The modem is registered to a GPRS
	off for 2900ms)	(GSM/GPRS/EDGE) network
Blue	Blinking (on for 100ms and	The modem is registered to a
	off for 2900ms)	UMTS (WCDMA/HSDPA) network
Green	On	The modem is connected to
		a GPRS network
Blue	On	The modem is connected to
		a WCDMA network
Sky Blue	On	The modem is connected to
		a HSDPA network
No Colour	Off	The modem is removed

Q : How do I configure the settings to DiGi’s settings to enable me to connect?

A : The built-in driver and client should already have DiGi’s settings. However, in case you need to alter the settings, please follow the steps below:

Connecting the E219 with a PC

Note:

First, power on the computer. Then connect the E219 with the computer. Otherwise, the E219 cannot be installed normally.

The following figure is the sketch map of the data cable.

1 Auxiliary USB data cable

2 Main USB data cable

3 Mini-USB connector

1. Plug the mini-universal series bus (USB) connector into the E219.

2. Plug the connectors of the main USB data cable and the auxiliary

USB data cable into the USB interfaces of the computer.

3.The OS automatically detects and recognises new hardware and starts the installation wizard. If the installation wizard does not respond, double-click the AutoRun.exe file in the driver path to manually install the E219 Manager.

4.Follow the prompts of the installation wizard.

5.After the program is installed, a shortcut icon for the E219 management program is displayed on the desktop.

4