Zenith LMG340 warranty CD Playback

CD Playback (Continued)

DISC SKIP

X

			PLAY/ PAUSE
DISC 1,2,3	CD OPEN/		(	)
	CLOSE( )
POWER		STOP ( )	D.SKIP

TAPE-A TAPE-B

•	/
•PLAY (		/	)
•STOP (		)/ CLEAR
•CD PAUSE (CD				)

Basic Playback Setup

1	Press POWER to turn on the unit.
2	Press the CD button to enter the CD mode.
	If no disc is in the disc drawer, the “NO DISC” indi-

cator appears.

3 Press CD OPEN/CLOSE () and place the disc into the disc tray.

The disc on the left (DISC 1) is played first.

DISC 1

With the label side up

ote

To load an 8cm(3 inch) disc, put it onto the inner circle of the tray.

Press CD OPEN/CLOSE (	) to close the disc
4 compartment.
Press PLAY ( ) or PLAY/ PAUSE (		) on the
5 remote control.

To Pause Play

Press CD PAUSE (CD ) or PLAY/ PAUSE ( ) on the remote control during playback.

Press the button again to resume play.

To Stop Play

Press STOP ( ) during playback.

To Skip a Track

•Press on the front panel or CD SKIP on the remote control to go to the next track.

• When button on the front panel or CD SKIP

button on the remote control is pressed once midway through a track, the player returns to the start of that track. When it is pressed again, a track is skipped each time the button is pressed.

To Fast Rewind or Fast Forward

After pressing and holding		/	on the front
panel or	/	on the remote control

during playback, press PLAY ( ) at the point you want.

To Go to the Next Disc

Press DISC SKIP or D.SKIP during playback or in Stop mode.

To Select a Disc Directly

Press DISC 1, DISC 2 or DISC 3 during playback or in Stop mode.

When you press DISC 1-3 before playing a disc, the unit will automatically start playing the selected disc.

16