WSK100, WSK200 and WSK210 Wall Switches
- Installation and Operating Instructions -
CAUTION
DO NOT DISCARD THIS MANUAL
•Important installation and operation instruc- tions included.
•Read, understand and follow these instructions for safe installation and operation.
•Leave this manual with party responsible for use and operation.
WARNING
Inspect components for damage. Damaged parts may impair safe operation.
•Do NOT install damaged components.
•Do NOT install incomplete components.
•Do NOT install substitute components. Report damaged parts to dealer.
INTRODUCTION
The WSK100 and WSK200 wall switches are designed to switch the fireplace on or off, and the pilot function activates the pilot flame as well. These wall switches interface with Intellifire™ systems only.
INSTALLATION PRECAUTIONS
This wall switch is tested and safe when installed in accordance with this installation manual. Do not install any components that may be damaged. Do not modify, disassemble, or substitute any of the components included with this kit. Installation of this unit must be done by a qualified service technician.
Placement of this wall switch may affect performance. An assessment of the space should be done prior to installation for optimum performance. See Section 1.1 for location recommendations.
NOTE: The electrical junction box provided with the fireplace must be wired with 110 VAC before installing this kit. See owner’s manual for details.
NOTE: All wiring should be done by a qualified electrician and shall be in compliance with local codes and with the National Electric Code ANSI/NFGA No. 70 - current (in the United States), or with the current CSA C22.1 CANADIAN ELECTRIC CODE (in Canada).
WARNING
Shock Risk
Do NOT provide any power to this unit until all wiring is complete.
•May destroy parts of this device and render it unusable.
•May lead to possible electrical shock.
Wall Switch | Control Box | Wiring Harness |
Figure 1. Items included in the WSK100 Wall Switch Kit
Wall Switch | Control Box | Wiring Harness |
Figure 2. Items included in the WSK200 and WSK210 Wall Switch Kit. (Delay circuit not shown).
Printed in U.S.A. Copyright 2007
Hearth & Home Technologies Inc.
20802 Kensington Boulevard, Lakeville, MN 55044
1 |