Operation
Harbor Freight Tools recommends that the Battery
installed by a professional technician.
Mounting
1.The Battery
2.It must be mounted in a location where:
a.it will be accessible.
b.it will have ample clearance for the key.
c.it will be away from any hot or metallic parts of the engine.
d.it will not encounter interference from nearby objects.
e.the positive cable (for negative ground vehicles), or negative cable (for rare positive ground vehicles) can be safely routed to.
3.Only install this unit when the negative clamp is disconnected and insulated from the battery terminal.
Warning!! If the terminal on the Battery
Usage
1.To allow the battery to start and run your vehicle, insert the Key (2) and turn it, as shown in Assembly Drawing below.
2.When you want to cut off the battery and keep the vehicle from starting, remove the Key (2). This enables the
Note: When you enable the
and most clocks will stop operating and other preset functions may be erased.
Check that the battery is truly disconnected (try to start the engine) every time BEFORE leaving the vehicle. It is the responsibility of the vehicle’s owner to verify that this unit is disconnecting the battery properly.
Assembly Drawing
Key (2)
Note: Second Key not shown.
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 92688 | For technical questions, please call | Page 4 |