TB14 and TB14H 10Mb Media Converters | Installation and User Guide (09/04) | ||
Cooling Method: Convection, plus the case is used as a heat sink on “H” models | |||
Media Converter LED Indicators: |
| ||
LED | TB14 | TB14H | Description |
PWR | unit | unit | Steady ON when power is applied |
Link | TP, | TP | Steady ON when proper link is |
|
|
| established at both ends of the segment.* |
RX/A | TP, BNC | TP, BNC | Blinking indicates activity, port is receiving |
|
|
| packets. (Steady On or Off = no RX activity). |
POL | TP | TP. | Indicates the unit has detected a TP receive |
|
|
| |
COL* . | TP, BNC. | TP, BNC | Indicates unit is simultaneously transmitting |
|
|
| and receiving data from the cables. |
JAB* | n.a. | unit | Indicates jabber (illegal packet length fault) |
|
|
| condition. when lit, |
Segment is partitioned, .NOTE:
*COL and JAB LEDs, only on TB14 and TB14H units, are indicators applicable to standard Ethernet collision domains with only
www . GarrettCom . com
6