| Specifications | ||
Continuous Power | 2,000 Watts |
| |
|
|
| |
Peak Power | 4,000 Watts |
| |
|
| ||
Input Voltage | 12 Volts Nominal DC | ||
|
| ||
Output Voltage | 120 Volts AC at 60 Hz | ||
|
| ||
AC Receptacles | (2) Two | ||
|
|
| |
Fuse | 30 Amps, 8 Qty. |
| |
(internal, for replacement only by a qualified technician) | |||
| |||
|
|
| |
Dimensions | 14” L x 9” W x | ” H | |
| 2 |
| |
Weight | 11.6 lb. |
| |
|
| ||
Indicators | Green LED = power on | ||
|
| ||
Switch | Rocker type, On / Off | ||
|
|
| |
Operating Temperature |
| ||
|
|
| |
Recommended Input | Battery cable |
| |
Cord | (not included; #2 AWG or larger cables recommended) | ||
|
| ||
| - Modified sine wave with overload protection | ||
Features | - Low voltage alarm1 and shutdown2 | ||
- Overvoltage shutoff3 | |||
| |||
| 1 at 10.5 V; 2 at about 10 V; 3 at about 15 V | ||
|
| ||
| Save This Manual | ||
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this device, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Do not plug in a battery charger if the charger has a warning that dangerous voltages are present at the battery terminals.
2.Keep work area clean. Cluttered areas invite injuries.
3.Keep inverter away from any direct heat source or combustible material.
4.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not
| REV 03/05 |
SKU 92464 For technical questions, please call | Page |