IPS42 Internal Power Supply | Installation and User Guide (11/09) |
4.Make sure that an AC power cord is properly attached to each Magnum IPS42 Series unit. Be certain that the AC power cord is plugged into a functioning and appropriate electrical outlet. Use the PWR LEDs to verify each unit is receiving power.
5.If the problem is isolated to a network device other than the Magnum IPS42 Series product, it is recommended that the problem device is replaced with a known good device. Verify whether or not the problem is corrected. If not, go to Step 6 below. If the problem is corrected, the Magnum IPS42 Series product and its associated cables are functioning properly.
6.If the problem continues after completing Step 5 above, contact your supplier of the Magnum IPS42 Series unit or if unknown, contact GarrettCom, Inc. by fax, phone or email - (support@garrettcom.com) for assistance
www . GarrettCom . com
23