Harbor Freight Tools 38391 operating instructions Volt Jump-start and power supply

Page 1

12 volt Jump-start and power supply

38391

Set up and Operating Instructions

Note: After purchase and before initial use of the Jump-Start, fully charge the Jump- Start battery until the DC Charging LED turns off.

After each jump start, fully recharge the battery until the DC Charging LED turns off.

Fully charge Jump- Start battery every 30 days to ensure long battery life.

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Image 1
Contents For technical questions or replacement parts, please call Volt Jump-start and power supplySafety Warnings Precautions SpecificationsSave This Manual For technical questions, please call Charging Controls Components120 V~ Charging Operation Using the Jump-Start as a 12 VDC Power sourceVDC Charging Estimated ApplianceJump Starting a Vehicle Recharging Using 12 VDC Supply MaintenanceBattery Replacement Emergency Light Bulb ReplacementPart Description Parts List and Assembly DrawingLimited 90 DAY Warranty