Grizzly specifications Model G8992, 110V Magnetic ON/OFF, Switch, Instructions

Page 1

MODEL G8992

110V MAGNETIC ON/OFF

SWITCH

INSTRUCTIONS

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

To reduce risk of serious burns, electrocu- tion or death when installing this switch:

Only use this switch to replace an existing machine switch that has the same physi- cal configuration and equivalent electrical specifications/ratings.

Installation must only be performed by an electrician or qualified service personnel, and all applicable electrical codes must be adhered to.

Turn off and completely disconnect all power sources to the machine before installing the switch.

Do not use this switch in wet or damp locations, or near explosive fumes or flammable liquids. It is not sealed or rated for these environments.

Make sure there is a verified machine ground on the circuit this switch is installed.

Figure 1. G8992 Magnetic ON/OFF Switch.

Introduction

The Model G8992 features a recessed magnetic ON (  ) button. The switch assembly is designed to snap into a 1 18" x 1 78" rectangular hole.

Specifications

Rated Voltage

110V

Rated Current

6A

Copyright © APRIL, 2011 By Grizzly Industrial, Inc.

Warning: No portion of this INSTRUCTION SHEET may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.

#TS13925 printed in CHINA

Image 1
Contents Model G8992 Switch110V Magnetic ON/OFF InstructionsInstallation