Setup Mode
To configure the HAI UPB™ Lumina Mode Controller using a Lumina keypad, it must be put into Setup Mode as follows:
Step | Operation |
1Press and hold the “AWAY” and “HOME” pushbuttons simultaneously for at least 3 seconds.
2All of the LED indicators will blink to indicate that the HAI UPB™ Lumina Mode Controller is in Setup Mode.
Configuring the HAI UPB™ Lumina Mode Controller from a Lumina Keypad
HAI UPB™ Lumina Mode Controllers reside on the 8th unit in any Room. Configure the HAI UPB™ Lumina Mode Controller on the 8th unit in a Room as follows:
Step | Operation |
1 | Put the HAI UPB™ Lumina Mode Controller into Setup Mode (as described above). |
2 | On the Lumina keypad, from the main menu or |
3 | Enter the Unit Number of the HAI UPB™ Lumina Mode Controller followed by the ' # ' key, and then press ' # # '. |
4 | The display will provide you with |
Reset to Factory Default Settings | |
To reset the HAI UPB™ Lumina Mode Controller to factory default settings: | |
|
|
Step | Operation |
1 | Press and hold the “AWAY” and “HOME” pushbuttons simultaneously for at least 3 seconds. |
2 | All of the LED indicators will blink to indicate that the HAI UPB™ Lumina Mode Controller is in Setup Mode. |
3 | Press and hold the “SLEEP” and “PARTY” pushbuttons simultaneously for at least 3 seconds. |
4 | The LED indicators will stop blinking and the “SLEEP” and “PARTY” pushbuttons will illuminate to indicate that it has |
| been reset. |
SPECIFICATIONS
Model Number |
|
Number of Backlit Pushbuttons with LED Indicators | 6 |
Connections | 18 GA |
Dimensions | 4.1 x 1.7 x 1.5 |
Weight | 0.25 lb. |
Mounting | Standard J Box |
Input Power | 120 ± 12 VAC |
Input Frequency | 60 ± 3 Hz |
Operating Temperature |
Note: It is normal for this switch to make a slight buzzing sound during operation.
LIMITED WARRANTY
HAI warrants this product against defects in material and workmanship, under normal use and service, for a period of two (2) years from the date of purchase. During the warranty period, HAI will repair or replace, at its sole option, if this product fails due to defect. This warranty does not cover the cost of removal or reinstallation of any product. This warranty does not cover failure caused by normal wear, damage to the product while in your possession (other than damage caused by defect or malfunction), or by its improper installation, including failure to follow the written installation and operation instructions, alterations, misuse, or abuse. The remedies provided for in this warranty are the sole and exclusive remedies thereof. In no event shall HAI be liable for incidental expenses or consequential loss or damages. For the complete HAI Warranty for USA policy, see the HAI web site at www.homeauto.com.
Any implied warranties, including warranties of merchantability and fitness for particular use or purpose are limited to a period of two (2) years from purchase date. This warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state. Some limitations may not apply to you.
For warranty and repair service within the continental United States, send defective unit carefully packaged, postage prepaid, along with description of trouble, name, return address, and phone number to: HAI, Repair Department, 4330 Michoud Blvd, New Orleans, LA, 70129. HAI will pay return shipping charges via normal ground service.
Outside of the continental United States: Contact an Authorized Distributor for repair/replacement instructions.