SENDER UNIT DESCRIPTIONS
1USB LINK
Transmits the USB signals from the Sender Unit to the Receiver Unit using
2LINK
Transmits the HDMI, Ethernet, and IR signals from the Sender Unit to the Receiver Unit using
3ETH
Connect a
4IR
Connect an IR Blaster cable (Gefen part no.
55V DC
Connect the included 5 V DC locking power supply to this connector.
6PWR
This LED will glow red once the included 5 V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available electrical outlet.
7HDMI In
Connect an HDMI cable from the
8USB Indicator
This LED glows green when a USB device is connected to the Sender Unit.
9USB In
Connects the Sender Unit to the computer using a USB cable.
5