Panel Descriptions, R Receiver | Gefen EXT-DPKVM-422 specs

PANEL DESCRIPTIONS

1 I/R Receiver

Receives I/R signal from the handheld Infrared remote control unit included with the 2x2 DVI KVM Switch.

2LED Input Status Indicator 1 & 2

This currently selected source input will be indicated with an active LED.

3Input Selector Button

Pressing this button will cycle the input, 1 or 2, which will be selected for output.

4Power Indicator

This LED indicator will glow bright red when the power is turned on.

55V DC Locking Power Connector

Connect the included 5V DC locking power supply to this connector.

6DisplayPort Input

This port will accept a single standard DisplayPort source device. Four ports are available for use.

7DisplayPort Output

This port will accept a single standard DisplayPort output device. The currently selected DisplayPort input source will be output via this port.

8Audio Input Connector (3.5 mm Mini Stereo)

Connect audio source device to this port using the 3.5mm mini stereo cable. There are two ports available and they are associated with display port inputs 1 & 2 respetively.

9Audio Output Connector (3.5mm Mini Stereo):

Connect Audio devices to these ports usin 3.5 mm mini-stereo cables. Audio will output for the currently selected input source.

10 IR Extender Port:

Connect IR extender reciever (EXT-RMT-EXT-IR) to this port.

11 USB Out Port (1-2):

Connect USB devices to these ports. There will be two ports available for simultaneous connection of the two USB devices.

12 USB In Port (1-2):

Connect USB source devices to these ports. There are two ports available for use and are associated with DisplayPort inputs 1 & 2, respecitvely.

13 RS-232 Serial Port

This port is used for serial communication using and RS-232 controll deviice. For more details, refer to page 16.

14 Console Control Switch Port

This port is used for contact closure-type remote control.