Gefen 6x2 HDMI user manual Connecting and Operating the 6x2 Hdmi Switcher

Page 8

Connecting and Operating the 6x2 HDMI Switcher

How to Connect the 6x2 HDMI Switcher to your devices

1Connect the supplied cables from the HDTV sources into the 6x2 HDMI Switcher inputs.

2Connect the cable from your display (monitor or projector) into the HDMI outs of the 6x2 HDMI Switcher.

3Connect any Digital Audio Receiver into the Toslink out of the 6x2 HDMI Switcher

3Plug the 5VDC power supply into the 6x2 HD Switcher.

*Note: TOslink is only enabled if you are using an HDMI source and an HDMI display, otherwise the source goes into DVI mode by reading the DVI display EDID, and at the moment, the ABC buttons are not enabled on the remote.

How to Control the 6x2 HDMI Switcher

Use the RMT6-IR remote control to toggle between sources.

5

Image 8
Contents 6x2 Hdmi Switcher Asking for Assistance Technical SupportTechnical Support Hours Write ToTable of Contents Introduction Includes FeaturesFeatures Front Panel Descriptions Back Panel Descriptions How to Control the 6x2 Hdmi Switcher Connecting and Operating the 6x2 Hdmi SwitcherHow to Connect the 6x2 Hdmi Switcher to your devices RMT6-IR Installation Binary Table RS232 SettingsRS-232 Interface 6x2 Hdmi Switcher Rack Mount Diagram Specifications Warranty MA-hdmi-642