CONNECTING THE
DIGITAL AUDIO TO ANALOG ADAPTER
How to Connect the Digital Audio to Analog Adapter
1.Connect an Optical and/or Coax cable from the audio source(s) to the Digital Audio to Analog Adapter.
IMPORTANT: Before connecting the included optical cable between the audio source and the Digital Audio to Analog Adapter, be sure to remove the clear plastic protective cover on both end of the TOSLINK™ connectors as shown in the photos below. Use your thumb and index finger to pinch the protective cover, then gently pull to remove the cover from the TOSLINK™ connector.
2.Connect a set of L/R analog
3. Connect the included 5V DC power supply to the power receptacle on the Digital Audio to Analog Adapter and connect the AC adapter to an available electrical outlet
Wiring Diagram for the Digital Audio to Analog Adapter
L/R RCA ANALOG AUDIO CABLE
SPDIF OR TOSLINK DIGITAL AUDIO CABLE
Audio Source
Converter
Audio Receiver
6