Sender Panel Descriptions

1Host Connection LED Indicator

This LED will become active once a valid connection is made by the host source and the USB 2.0 LR Extender.

This LED will become active once a valid connection is made between the included 5V DC power supply and an open wall power socket.

3USB “B” Input

Connect the USB source to this input.

This LED will become active once a valid connection is between the sender and receiver units.

Connect a CAT-5, CAT-5e or CAT-6 cable between this port and the CAT-5 connection port on the receiving unit.

6Activity LED Indicator

This LED will be active when trafﬁc is passing between the sending and receiving units.

Connect the included locking 5V DC power supply between this port and an open wall power socket.